Sometimes there are problems associated with the lack of access to free wifi. In this case, an Iphone can be used as a modem, which meets certain system requirements and uses cellular communication operator providing tethering service on this device. Only then will he create a portable Internet access point and be able to distribute Wi-Fi to other devices, as well as with via Bluetooth and USB cable. Setting up functions does not take much time, unlike routers.
Previously, for these purposes it was required to install additional software, now all the necessary functions are in the standard iOS, which allows you to easily and quickly enable, configure and work. But at the same time, you need to remember that when working in modem mode, the Iphone discharges much faster, so after finishing work, you need to turn off the “Modem Mode” function.
How to share internet from iphone
Iphone will be able to distribute the Internet to other devices, which is equipped with a cellular module and has a connection to mobile internet. If you have unlimited or inexpensive tariff plan then you won't be in trouble. Very often, billing is carried out according to the amount of information downloaded and transferred, which will quickly bring your balance to zero. To use your iPhone as a modem, you must first make sure Cellular Data and Turn on 3G/4G LTE are turned on. To do this, go to the "Settings" tab and select "Cellular". Next, go to the "Modem Mode" option and enable this feature. The system may ask you to activate Bluetooth for this. A message will appear on the phone screen indicating that the modem mode function is working. 
It remains only to indicate wifi password connections and start distributing the Internet. It is recommended that the password contain at least 8 characters. It can be large and small English letters, numbers and punctuation marks. With these simple steps, you can connect to the Internet from a computer or other devices that are based on Windows base, Android or Linux. The Wi-Fi function is automatically disabled if you disconnect all connected devices from the hotspot.
We share the Internet from Iphone via USB cable
You can also use your own Iphone to distribute the Internet using a USB cable. In this case, the loss of Internet speed is excluded, and the phone is not discharged. To do this, connect the iPhone to the computer and go to the "Control Panel". Here we select the “Network and Internet” function and then “View network status and tasks”. The connection must be activated, if not, then we perform this manipulation. Sometimes you need to restart your computer to display the connection. In the "Modem mode" function, you need to switch the option to "USB only".
We distribute the Internet from Iphone via Bluetooth
To connect to an iPhone via Bluetooth, you need to pair it with a computer. A code is displayed on the computer monitor, which is entered into the Iphone to activate the “Create a Pair” function. Then you can connect from your computer to the device. The phone will display the inscription "Modem mode", which indicates correct connection. To carry out these operations, an up-to-date version of iTunes may be required, if your version is outdated, then you need to reinstall it. During the distribution of the Internet, the phone remains connected and has the ability to receive SMS messages and inbound calls. When talking, the Internet connection is interrupted and automatically restored after it ends.
By purchasing new iPhone, you will always find a universal USB cable in the box. Through an adapter, it allows you to charge your device from AC power or connect it to a PC. At the same time, Apple's policy is directly aimed at expanding the capabilities of wireless technologies. The company's mobile devices are becoming more and more independent of iTunes every year. Software updates and synchronization are performed "over the air". In this article, we will look at how to connect an iPhone to a computer via USB and how relevant this connection method remains.
Apple smartphones use two types of connectors for connection. On model 4S and earlier, this is a 30-pin connector.
Released in 2012, the iPhone 5 received a progressive "mirror" Lightning connector. The company used it in all subsequent models, making it standard for its mobile devices. So if you own a 5SE, 6, 7, 8 or X the cable should be as shown in the following picture.
First connection
The first time you connect iPhone to your computer, you'll be prompted to trust between devices. Without following this procedure, you will not be able to access the information stored on your smartphone. Without creating a trusted relationship, the smartphone will only be charged from the computer. Provided that on USB port a current sufficient to perform this operation is supplied, or rather, at least 1A.
- Before connecting the laptop to the phone, launch iTunes. We connect the cable to the devices with the appropriate connectors. The first request is from iTunes. Click on the "Continue" button.
- The next request will appear on the smartphone screen as a pop-up message. Click on the interactive button shown in the screenshot.
- We enter the password from the smartphone and complete the operation of linking devices.
- In the iTunes window, use the icon marked with an arrow to switch to the connection settings settings.
- In the navigation area, select the overview of general properties, marked with the number "1". In the block marked with a deuce, we determine the method of creation backups. In iCloud, they will be created once a day. Automatic synchronization executed when the smartphone is connected to charger and is within range of a wireless network with Internet access.
Storing copies on a computer requires a USB connection. Having chosen this method in the third block, we mark the item "Synchronize on connection". When working with wireless network you don't need to use a cable. When both devices are within the range of the Wi-Fi signal of the same router, the program itself will find the iPhone and transfer the changes made on the computer to it. We complete the configuration by clicking on the "Finish" button.
Connecting without iTunes
On Mac computers, iTunes is a preinstalled program included with operating system. Windows users have to install it themselves, and not everyone likes it in terms of functionality. Given that Apple is reducing its dependence on this software, you can connect your iPhone to your PC directly. In this case, photos and videos recorded on the camera or previously stored in its memory will become available.
- We connect the unlocked smartphone to the USB port. In this case, Windows will correctly recognize it in order to download and install the necessary drivers - just like it does for a flash drive. On the iPhone screen You will be prompted to access media files. We agree by clicking the button indicated in the screenshot.
- As a result of the actions performed, a new device will appear in Explorer.
- To get to its contents, you need to open several folders. Their sequence in the screenshot is indicated by a frame. The searched materials are contained in the 100APPLE directory. There is no internal division in it, so you will have to search for what you need by sorting by the date of creation or modification. Of all the control functions, only copying from the device to the PC in original quality is available.
Cancellation of trust
In some cases, you may need to revoke the trust that you have given your computer to access your iPhone. There is no special menu or software for this purpose, but Apple allows you to solve this problem in a few steps.
- Open the "General" section in the settings menu. We scroll the screen to the very bottom until the item indicated in the screenshot opens.
- Click on the interactive name of the action highlighted by the frame.
- We enter the lock code to confirm the identity of the owner.
- A reset menu will appear at the bottom of the screen. Confirm the decision by clicking on the virtual button. Reboot is not required - the action is performed immediately and irreversibly.
- The consequences of this procedure will be the need to re-enable access to geodata for applications that require them to work properly.
You can only revoke trust for all computers at once. On those used for synchronization and data exchange, you will need to repeat the procedure described in the "First time connection" section.
Synchronization errors
Apple recommends that you keep your smartphone software and iTunes up to date. latest versions. At one time, after the release of the iPhone 7, Windows users 10 complained about the appearance of an error with the code 0xe8000002d. As a result, the smartphone may freeze, not allowing itself to be recognized by the OS or at the synchronization stage. A surge in requests with a similar problem dates back to November 2017. It must be assumed that subsequent updates to the Apple and Microsoft OS made it possible to get rid of it. If you are "lucky", follow these steps:
- Disconnect the cable connection.
- Restart Windows.
- Shut down for a few minutes or restart your iPhone.
- Check the integrity of the cable being used or replace it.
- Reconnect and sync.
Since the problem is the loss of communication between devices, this should be enough to normalize the work.
Even if you set up the interaction of a computer and a smartphone “over the air”, a cable connection sometimes comes in handy. With it, you can use your iPhone as a modem to access the Internet.
- Turn off on computer Wi-Fi module and connect mobile device to the USB port. Open the smartphone settings. Network interfaces are located at the top of the screen. Select the section marked in the screenshot.
- Move the slider marked with a frame to the on position. The connection is made automatically, as the only one available in the absence of Wi-Fi and Ethernet. The upper part of the screen should turn blue, visually confirming the activation of the modem.
Finally
Connecting an iPhone to a computer via a USB port is not difficult, but it is increasingly losing relevance, giving way to wireless technologies. Any actions with a smartphone can be performed without tying yourself with wires. Nevertheless, in this article we have given several cases in which the use of a cable is unavoidable. Given its need to charge a smartphone, it is always at hand. At the right moment, you just need to know how to use it.
Video instruction
For users who like not only to read, but also want to see how all the described operations are performed, a training video is posted below. It clearly and consistently shows all the steps for connecting an iPhone to a PC via a USB cable.
It is not necessary to pay employees of the Apple service center or sellers to set up the purchased iPhone: you can set all the necessary parameters yourself. It will not work under any circumstances to disable the device or damage it during the setup process.
There is no big difference between how to set up an iPhone 4S, 5 or 6 Plus. The principles of customization remain unchanged for several generations of smartphones, only new features are added.
First power on
When you start your smartphone, you will be prompted to turn on location services, thanks to which Maps and other similar applications can determine the approximate location of your iPhone using information from available sources ( cellular networks, Wi-Fi connection). Location Services allows you to detect the device if it is lost, so it is recommended to activate it. If you did not activate geolocation when you started your phone, you can do this at any time in the settings. The only drawback of this technology is battery consumption. Therefore, if you have problems with charging, it is better to turn off the services.
Be sure to leave Find My iPhone enabled! Without it, it will not be possible to detect a smartphone in case of its theft or loss!
The iPhone settings window will appear next after geolocation. Considering the question of how to restore an iPhone, we have already talked about this feature, so we will briefly go through the main points. There are three setting options:
If you have a new device, then select the first item - "Set up as new". The two remaining options are suitable for restoring settings and content after a factory reset.
To interact with most Apple services, you need a special identifier called an Apple ID. 
If you already have Account, enter its parameters so that it is saved on the new device. If there is no profile, you will have to create it.
An Apple ID can be created or specified in settings at any time, so setting it up the first time turning on iPhone can be skipped.
After the Apple ID, a license agreement will appear on the screen, without accepting the terms of which you will not be able to complete the iPhone setup. It is not necessary to read it: nothing vital is indicated there. 
Security and Diagnostics
Starting with the iPhone 5s, the smartphone has added the function of identifying the owner by fingerprint - Touch ID.
The scanner built into the Home button is used to unlock the device and authorize in the AppStore.
Here you can also specify an unlock password, which will be requested if the fingerprint does not work for some reason. All these operations can be performed later in the smartphone settings. 
The last window is a request to send information about the operation of the device to developers. If you choose to automatically report bugs and crashes, then iOS developers can fix them faster. 
After the "Diagnostics" the long-awaited start window will appear, in which you need to tap on the "Get Started" button. The standard iOS desktop will appear on the screen - you can begin to deal with all its functions and capabilities.
Transferring contacts from your old phone
Having given up using your old phone, you are unlikely to want to be left without all the contacts that were stored on it. The problem is that in the old iPhone models micro-SIM is used, and more modern ones use nano-SIM. Naturally, we are not talking about any compatibility: the only way out is to connect a SIM card through an adapter. 
However, you can not suffer with an adapter and SIM cards, but use one useful service Google. True, for this you will first have to transfer contacts to your phone and save them as a CSV file.
If you did not have an Android smartphone, but a regular one mobile phone, then to export contacts to your computer you will have to use proprietary utility. For Nokia it's Nokia PC Suite, for Sony it's MyPhoneExplorer, etc.
Obtained using the utility and Microsoft programs Outlook file with contacts must be uploaded to your Google profile:
You can transfer contacts to iPhone via iTunes or save them directly using an internet connection.
iTunes
Connect your iPhone to your computer and launch the iTunes app:
After pressing the "Apply" button, synchronization will start, as a result of which the phone iPhone book all your entries will appear.
Internet connection
If you have the opportunity to connect to WI-Fi, then you can transfer contacts without using a computer and iTunes:
Synchronization of records phone book starts when you launch the Contacts app on your iPhone.
Hey! But really - how to be? Running for a new phone? Hand over the phone for repair? Throw out the computer? The options are certainly interesting and almost certainly effective, but too expensive :) Yes, and you shouldn’t get so excited, because the problem with iPhone connection to a computer almost always can be solved without resorting to drastic measures.
So what should be done? First you need to determine what the "hitch" actually is. Which device is failing? It's easy to do - we take a gadget and go to a neighbor (friend, work, electronics store, etc.). In short, our main task is to find another PC or laptop. Found? Fine!
We try to synchronize with it, if everything works out here, then ...
iPhone won't connect to computer. Reason - PC
Yes, in most cases it is he who causes connection problems. To exclude them, do the following:
- First of all, reboot both devices. So to speak, for prevention.
- Trying different USB ports and check, for example with a flash drive, their performance. After all, one of them may burn out or simply not work.
- We do not use adapters, splitters, extension cords and other devices for USB ports. We stick the cable directly into the system unit.
- . The ideal option would be, and the next latest version from the Apple website.
- Turning off third-party software(antiviruses, firewalls). Don't forget to turn them on after checking!
- The most radical step - reinstalling the operating system, will most likely help, but it will take time ...
If the iPhone cannot connect to another computer, then the problem is clearly in the device ...
Why the computer does not see the iPhone. Reason: phone
No matter how reliable and stable Apple products are, they can also cause connection delays.
Although most often, the owners of these devices are to blame, bringing them to such a state that it becomes surprising how they can still, and not just synchronize. I got distracted :)
Returning to the topic, we try to perform the following steps:
- After connecting, unlock the phone, it is quite possible that you will see a pop-up window asking: "Trust this computer?". Without an affirmative answer, no synchronization will occur, only charging.
- Change cable. Even if there is no visible damage, the wire may be defective. Or it is quite possible that it is not original - but in this case, there is the possibility of a device with an "unsupported" accessory.
- devices. If you decide to take such a desperate step, remember about backup information (using or ), otherwise you will lose all your data forever.
- Jailbreak, or rather the so-called tweaks installed with it, can also contribute to sync problems.
- Update software. It's always helpful!
- Clean the connector on the phone (possibly oxidized or dirty). Important! Clean very carefully, ideally entrust to a professional. If you undertake to do it yourself, look for information on the Internet, otherwise you can aggravate the situation.
- The last point we have is the saddest thing - the connector for charging and synchronization is broken or out of order. One road to service center! If possible, contact only the official workshops listed on the company's website.
By the way, there is another win-win option - contact Apple support. And torture them with the question: “Why doesn’t my iPhone connect to the computer using usb?”. To be honest, I have not tried it - but I think I won’t hear anything new from them, and the conversation will take a lot of time.
As you can see, in most cases, you can get by with "little blood" and troubleshoot at home.
The main thing is to be attentive, consistent, take your time and check absolutely everything. possible reasons, which can lead to connection problems.
We tried everything, but the situation has not changed for the better - the iPhone still does not connect to the computer? Be sure to write in the comments - we will try to figure it out and solve your problem all together!
