Eternal dfu iphone 6 plus. How to put different iPhone models in DFU mode

05.02.2022

Video

You need to enter the device into this mode if the user of the "apple" gadget encountered problems when updating the operating system or when flashing a smartphone with a jailbreak. In addition, by transferring the iPhone to DFU-mode and returning it to its normal state, you can fix a number of system errors that can lead to incorrect operation of the device.

DFU mode on iPhone (otherwise - firmware updates) are constantly confused with recovery mode(recovery mode). In fact, the difference is huge, and it is as follows:

recovery mode– softer mode compared to DFU; v recovery mode iPhone gets through the "OS" iOS, and in DFU Mode bypassing her. Mode DFU applies only when recovery mode refuses to help.
In mode DFU cannot be accessed if the device is not connected to the media combine iTunes. To enter into recovery mode it is not necessary to connect the gadget to a PC.

There are also external differences between the two specific regimes. At the gadget DFU MODE completely black screen, no Apple logo; the gadget does not respond to pressing " Home" and " power" separately. On located in recovery mode, the USB cable and icon are visible. iTunes.

How to enter iPhone into DFU MODE?

There are two ways to enter an "apple" gadget into DFU mode - both are applicable to any of the Apple devices. The first one is:

Step 1. Connect iPhone to PC and launch iTunes.

Step 2. Press the buttons " Home" and " power» at the same time and hold for 10 seconds.

Image: w3bsit3-dns.biz

Step 3 Let go" power", a " Home» leave it pressed until iTunes there will be no message about iPhone being detected in emergency mode.

Image: nastroyka.zp.ua

The gadget itself will not let the user know that it has switched to DFU MODE.

The second way to switch to the firmware update mode is considered more correct, however, it is often not obeyed by beginners. The initial action is also to connect the smartphone to iTunes- then proceed as follows:

Step 1. Turn off the device - wait until its screen is completely off.

Step 2 Hold down the " power", count down 3 seconds, then press additionally " Home". This is where the main difficulty lies: you need to perform these operations so that the iPhone does not turn on in normal mode.

Step 3. Count down 10 seconds after pressing " Home and let go power». « Home"Don't let go.

Step 4 V iTunes a message will appear - in the window click " OK».

Is it possible to put an iPhone into DFU mode if the physical buttons don't work?

To get into mode DFU without using physical buttons, you will have to transform the existing original firmware into custom firmware using a simple utility called redsnOw. You can download this program for Windows and OS X.

Before you start using the utility, you need to download the appropriate firmware to your PC hard drive. Then you should act like this:

Step 1. Run redsnOw and follow the path Extras» — « even more» — « DFU IPSW».

Step 2 In the window " DFU-mode IPSW workaround» click « OK».

Step 3. Across File Browser find the firmware you downloaded earlier (format file ipsw).

The utility will start creating custom firmware - the progress of this process is reflected in the status bar.

Once the process is complete, a message will appear stating that the IPSW file has been successfully created. In the message you will see the path by which you can get to the firmware.

You can distinguish DFU-firmware from the original one by its name: custom firmware always has the prefix "ENTER_DFU_".

Step 3 Connect your iPhone to your computer and launch the iTunes program, go to the gadget control menu by clicking on the smartphone icon.

Step 4. Press and hold on your Windows PC keyboard “ Shift” (on Mac — “ Option”) and click on the button “ Restore iPhone…”.

Step 5. Select custom firmware in the window that appears.

Step 6. iTunes will warn you that restoring your iPhone will delete your data - click " Restore».

From this moment, the firmware will be downloaded to the smartphone via DFU Mode.

How to get iPhone out of DFU mode?

Bringing your iPhone back to normal is quite simple:

Step 1. Disconnect the gadget from the PC.

Step 2 Press the buttons " Home" and " power» at the same time and hold for 10 seconds. It remains to wait until the smartphone exits DFU mode, reboots and starts working in standard mode.

If the gadget is connected by cable to the computer, then after a 10-second wait, you need to release the buttons and hold down " power» for another 3 seconds (similar to normal power-up).

Conclusion

Entering a smartphone into DFU mode is a rather dangerous procedure; if the user makes a mistake, the iPhone may end up in the " eternal apple" or in " recovery loop” - getting out of these modes is not easy. To return the smartphone to normal operation, you will have to use additional software, like iReb or Tiny Umbrella, or turn to specialists for paid assistance (if there is no time to master special programs).

DFU mode on the iPhone (firmware updates) is constantly confused with Recovery Mode (recovery mode). In fact, the difference is huge, and it is as follows:

Recovery Mode is a softer mode compared to DFU; iPhone gets into Recovery Mode using the iOS operating system, and into DFU Mode bypassing it. DFU mode is only used when Recovery Mode refuses to help. DFU mode cannot be entered if the device is not connected to the iTunes media combiner. To enter Recovery Mode, it is not necessary to connect the gadget to a PC.

There are also external differences between the two specific regimes. The gadget in DFU MODE has a completely black screen, without the Apple logo; the gadget does not respond to pressing "Home" and "Power" separately. On the display of a smartphone in Recovery Mode, you can see the USB cable and the iTunes icon.

How to put iPhone 6 into DFU mode

DFU mode or Device Firmware Update is a special operating mode for mobile devices from Apple. In this operating mode, new firmware can be downloaded to the device, even if the device does not start or is not stable. DFU mode is used to restore the iPhone (as well as the iPad and other iOS mobile devices) to working capacity after update problems, JailBreak installation, or other software failures that render the iPhone inoperative.

The process of putting an iPhone into DFU mode is very similar to the process of entering recovery mode.

You can enter the iPhone into DFU mode using the buttons located on the device. For iPhone models up to version 6 inclusive, the algorithm of operations is somewhat different from entering the recovery mode of later versions.

Connect the device to your PC with a USB cable
Launch iTunes on your PC. Attention: the latest version of the program must be installed on your PC.
Press and hold the Power and Home buttons at the same time for 10 seconds.
Release the power button while keeping the home button pressed for 10 seconds. You should see a message on your computer screen in iTunes that your device is in recovery mode. The display of the phone itself will remain black.
In iTunes, select the "Restore iPhone" option to reset your phone to factory settings. After that, all personal data will be erased, and the latest version of the system is installed on the iPhone.
To exit recovery mode, press and hold the Power and Home buttons at the same time for 10 seconds, after which the device will turn off. The next time you turn it on (by pressing the power button), the device will boot up normally.

Has your Apple smartphone suddenly turned into a “brick”? Then the first thing to do is to put the device into a special low-level recovery mode called DFU (Device Firmware Update).

What is DFU mode?

DFU Mode– a special low-level device mode that does not use the operating system boot. The USB connection only sends technical information signals to the device.

In the past, DFU mode was mainly used to get a jailbreak on the first versions of the iPhone, iPad or iPod Touch. Currently, DFU mode is only used when restoring an iOS device protected by a password-lock (not to be confused with Find My iPhone Activation Lock), as in recent years hackers have released tools that require minimal user participation.

A device in DFU mode does not display anything on the screen, the display is completely black.

After iTunes on the computer recognizes that the device is in DFU mode, the message " iTunes has detected an iPhone in recovery mode".

Since 2007, as iOS devices have evolved, Apple has changed the input (output) process of iPhone, iPad and iPod Touch to DFU mode three times. At the moment, there are three instructions, each of which corresponds to a specific device.

How to put iPhone 2G, 3G, 3GS, 4, 4S, 5, 5C, 5S, 6, 6 Plus into DFU Mode

1 . Connect your device to your computer with a cable.

2 . Press the buttons at the same time Home + Inclusions until the device screen turns off (10-15 seconds).

3 . After one second, after the screen of the device has gone blank, release the Power button, but continue to hold the Home button for 15 seconds.

After the device is in DFU mode, iTunes or another program you are using will notify you with a message that the device is in recovery mode.

How to get iPhone 2G, 3G, 3GS, 4, 4S, 5, 5C, 5S, 6, 6 Plus out of DFU Mode

To exit DFU mode, simply press and hold down the buttons at the same time. Inclusions and Home for 10-15 seconds until the Apple logo appears on the screen.

How to put iPhone 7 and iPhone 7 Plus into DFU Mode

The iPhone 7 and iPhone 7 Plus are the only Apple smartphones to receive a second modification to the process to enable DFU mode.

1. Connect iPhone 7 to Mac or Windows computer;

3. Turn off iPhone;

4. Press and hold the power button located on the right iPhone for 2 seconds;

5. While holding the power button, press and hold the volume down button located on the left;

6. Hold both buttons for 10 seconds.

7. Release the power button while continuing to hold the volume down button for another five seconds;

8. If the display still remains off, then the device has entered DFU mode. In this case, iTunes will display a notification about the detection of the connected iPhone 7, after which it can be restored (instruction).

Note: If the Apple logo appears on the screen, then you held the buttons for too long and you need to repeat everything from the beginning;

In DFU mode, the screen should not display anything (just a black display).

9. Note: if any logos appear on the screen (Apple, iTunes with cable, etc.), then you have activated recovery mode, not DFU. If it works, great. If not, try enabling DFU mode again.

How to get iPhone 7 and iPhone 7 Plus out of DFU Mode

To exit DFU on an iPhone 7 or iPhone 7 Plus, hold down the Volume Down button and the Power button until the Apple logo appears on the phone screen.

How to put iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS and iPhone XS Max into DFU Mode

1. Connect a powered iPhone to a computer with iTunes installed using a cable.

2. Press the Volume Up button on the left sidebar, then release it.

3. Press the Volume Down button on the left sidebar, then release it.

4. Press and hold the Power button until the iPhone screen turns black. This usually takes about 10 seconds.

5. Without releasing the Power button, press and hold the Volume Down button for 5 seconds as well.

6. Release the Power button, but keep holding the Volume Down button for about 10 seconds.

7. A notification will appear in iTunes that the program has found an iPhone in Recovery Mode.

Done - your iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS and iPhone XS Max have gone into DFU mode (black screen)! Now you can start restoring or updating it (detailed instructions).

If, after all the manipulations done, you didn’t see the notification in iTunes, it means that a mistake was made somewhere. Read the instructions again - now as carefully as possible - and try again.

How to Exit DFU Mode on iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS and iPhone XS Max

If you entered DFU not to restore the firmware of your iPhone, but for something else (for example, just to try how to enter the mode) and have already finished your business, you can exit it like this:

1. Press and release the Volume Up button.

2. Press and release the Volume Down button.

3. Press and hold the power button until the Apple logo appears on the screen.

According to yablyk

Apple smartphones are very stable and rarely need a firmware restore. However, sometimes it becomes necessary to return the iPhone to the factory state in order to get rid of glitches after an unsuccessful software update or system failure.

For this it will be useful DFU mode.

📍Thank you re:Store for useful information. 👌

DFU mode ( Device Firmware Update) is a low-level iPhone firmware update mode. When it is turned on, the smartphone will be recognized by the computer for iOS recovery. The iPhone itself will not load the graphical shell of the system and respond to button presses.

Very often, DFU mode is confused with Recovery mode. Outwardly, they are easy to distinguish, in DFU mode there are no signs on the iPhone screen, and in recovery mode you will see an indicator of connecting to a computer.

Recovery Mode is a software recovery mode for iOS. At the same time, the data remains in place, and system files are restored from the original firmware or backup.

DFU mode is an iOS recovery in bootloader mode, in which all files are erased and overwritten with data from the original firmware.

Conventionally, Recovery Mode can be compared with downloading a Time Machine backup, and DFU mode with a complete reinstallation of the operating system.

How to Enter DFU Mode on an iPhone with a Physical Home Button

All older Apple smartphones up to and including the iPhone 6s and iPhone SE have a physical Home button. On them, the entrance to the DFU is carried out as follows:

2. Turn off iPhone.

4. Hold down the Home button while continuing to hold down the power button.

5. After 10 seconds, release the power button and continue to hold the Home button for another 5 seconds.

To exit From DFU mode, you need to hold down the Home and Power buttons for 10 seconds.

How to Enter DFU Mode on iPhone with Touch Home Button

In smartphones with moisture protection, the Cupertinites abandoned the physical button on the front edge of the smartphone. It was replaced by a touch key. The procedure for switching to DFU mode has become slightly different:

1. We connect the smartphone to the computer using a cable.

2. Turn off iPhone.

3. When the screen goes blank, hold down the power button for 3 seconds.

4. Press and hold the volume down button while continuing to hold down the power button.

5. After 10 seconds, release the power button and continue to hold the volume down button for another 5 seconds.

The black screen of the smartphone will indicate the entrance to DFU. The apple on the screen signals the start of iOS download, you will have to repeat the procedure again.

To exit From DFU mode, you need to hold down the Volume Down and Power buttons for 10 seconds.

As you can see, the process of entering and exiting this mode differs only in the use of the volume key instead of the Home button.

Here is a video tutorial for models with a physical and virtual home button.

How to Enter DFU Mode on iPhone with Face ID

With the release of the iPhone X, Apple completely abandoned the button on the front side of the smartphone, and the transition to DFU mode was a little more complicated:

1. We connect the smartphone to the computer using a cable.

2. Alternately press the volume up button, then the volume down button and hold down the power button.

3. As soon as the screen of the smartphone is off, hold down the volume down button and continue to hold the power button for 5 seconds.

4. Release the power button and keep holding the volume down button for another 15 seconds.

If you see the Apple logo, then the iOS download has started and you did something wrong. Will have to try again.

To exit From the mode, you need to alternately press the volume up button, the volume down button and hold down the power button. You can release the button when the apple appears on the screen.

For clarity, here is a video instruction for iPhone X/XS/XR/11/11 Pro.

DFU mode (Device Firmware Update) is a device firmware update mode. Refers to emergency modes and is recognized by iTunes when you connect your iPhone, iPad, and iPod Touch to a Mac or PC using a USB cable as a recovery mode.

How DFU mode works

In this mode, the iOS device works without loading the operating system shell, so no picture is visible on the iPhone display and the device does not react in any way to pressing the "Power" and "Home" buttons separately.

It differs from the Recovery Mode in that in this mode the device does not show visible signs of life (the control button does not work, there is no image on the display).

How to turn on

Press and hold the lock button until the screen turns black, then press and hold the lock button and volume down
After 5 seconds, release the lock button while continuing to hold the volume down button

iPhone 7, iPhone 7 Plus

Connect device to Mac or PC
Press and hold the lock button and volume down at the same time
After 8 seconds, release the lock button while continuing to hold the volume down button

Connect device to Mac or PC
Press and hold the Home button and the Lock button at the same time
After 8 seconds, release the lock button while continuing to hold the home button