Zte entrance to the router. ZTE network equipment: configuring routers for Rostelecom

16.07.2021

Rostelecom provides its subscribers with various equipment for rent, including routers. The company is not engaged in the production of equipment, but in world practice a scheme is widely used in which the manufacturer supplies the provider with equipment without a logo, and the provider already applies his own. Rostelecom does the same (it cooperates with huawei, zte, eltex, sagemcom, etc.), which means that customers may have different models. In this article, we will look at universal ways gaining access to the router settings.

How to enter the router settings

So, you got a router for rent or bought it, came home and want to set up the Internet or make any other settings (for example). To do this, you need to open the package, connect power and cable to the router, but not the one that comes to your apartment from the entrance, but which will connect the router to a computer or laptop. Connect the other end of the cable to your turned on computer. For most router models, the admin panel is available at 192.168.1.1 or 192.168.0.1 . Type one of these into your browser's address bar and press enter.

After that, you should see a window for entering a username and password.

The login and password for entering are indicated in the operating instructions for the router, but if you could not find such information there, then try the following combinations:

If one of the combinations is suitable, then a page with available router settings will open in front of you.

If these options do not work, then you need to perform a factory reset. To do this, find the Reset button on the back wall and hold it down for a few seconds with the router turned on.

Basic settings of the Rostelecom router

The first tab of the router settings displays a summary of the current state of the device. Here we do not make any settings.

On the second tab, the Internet connection is configured. Select the interface you need (in our case, PPPoE/VPN) and click on the "add connection" button.

In the window that opens, you need to select the protocol, come up with a name for the connection, enter the username and password for accessing the Internet (this information should be in your contract), as well as the server address. Leave the rest of the items in the "auto" state.

If you have several computers at home, then on the next tab you can assign each device its own ip address on your home network.

The next tab is responsible for setting up Wi-Fi. Here you need to set the name of your network, select the type of encryption and come up with a password.

The manufacturer regularly releases firmware updates in which it fixes errors found by users and adds new functionality to the device. That is why it is worth checking regularly for available updates. Go to the settings tab and find the "update" item there. The screen will display the version of the current firmware and available for updating. All that is required of you is to click on the "install" button.

As you can see, with minimal knowledge, you can independently configure the router without calling a company specialist at home. Ask questions in the comments and we will help you, but for now we recommend watching a video on this topic.

ZTE ZXHN H108N is a modem that has spread widely among major operators in several countries, such as Ukraine, Kazakhstan, Russia. It is recommended, rented out. ZTE ZXHN H108N modem supports ADSL connection technology, enables wired and wireless Internet access. The ZTE ZXV10 H108L modem is configured according to the same principle. Setting up the ZTE ZXHN H108N modem is not difficult, any user who has carefully studied the instructions below can do it.

Setting for work

For ZTE ZXHN H108N, the modem is adjusted through the browser after. Entering the settings interface is possible through any browser, where in the address bar enter 192.168.1.1, press Enter.

In the authorization window, type the same word in the User name, Password lines - admin. After clicking OK, a window with settings will open.

If your router has already been used before, clear its settings by resetting it to factory settings. This is done by pressing the Reset button located on the rear panel. Press it for 10 seconds, wait for the modem to reboot. After the system prompts you to change the password, enter the old username, the new password.

Enter the type of DSL connection below if requested.

The next steps are set in agreement with the provider, usually they can be found in the contract or clarified by phone.

The connection type is often set to PPPoE, if the provider has assigned a dynamic IP, DHCP is set.
Enter then VPI/VCI again, taking from the contract. Below you will see “Connection with LAN ports”, check the boxes where you planned to distribute the Internet, it is advisable to leave the last port free. Also check SSID1 for Wi-Fi to work.

Then you will be asked to connect WAN - for television, if the service is connected, agree and put the necessary data there.

When the reboot occurs, the device will be ready to function with the numbers entered.

WiFi setup

After the ZTE ZXV10 H108L is rebooted, the modem will be ready to work.

ZTE F660 is a router that uses GPON technology to connect to the Internet. In addition to the standard Internet distribution functions for devices connected to the router via a cable or via Wi-Fi, the ZTE router is able to provide its owners with IP telephony and provides the ability to create local WEB servers.

What distinguishes ZTE F660 from other routers purchased for home use is the advanced development of xPON communication. Another important feature of the router is that the device is multifunctional. In addition to the standard four PJ-45 ports and the ability to connect clients via Wi-Fi, the device has the ability to connect USB 2.0 electronic media and devices via .

Characteristics and features of the device

Operating frequency - 2.4 GHz
Data transfer over Wi-Fi operates at a speed of 300 Mbps
Implemented technical support for 4 SSIDs with a one-time connection of 128 users to each network
Support WPS mode to increase the WiFi coverage of other switches.

On the back of the router are:

Control buttons for WLAN and WPS functions
One port for connecting USB devices
POTS connectors (2 pcs.)
Ports for LAN connection (4 pcs.)
To reset the optical modem ONT ZTE ZXHN F660 to factory settings, there is a RESET button on the back side, located in the recess of the case.
Connector for the power supply unit from the mains of the device.
Button to turn on and off

How to connect a router

After installing and turning on the router, you need to configure this equipment for full use.

Connect the fiber optic cable to the outlet and to the router socket.
Connect the LAN cable to the network card of the computer or laptop. Connect the other end of the cable to any LAN connector on the router's router.
Check that the LAN activity indicator is on.

After setting up a wired connection, you need to set up access via Wi-Fi.

Step-by-step configuration of the MGTS GPON ZTE F660 router

in the address bar of the browser, type ip address "http://192.168.0.1
on the router configuration page, enter: login - "admin", password - "admin".
If services for the provision of a router are carried out using the MGTS provider, try entering “mgts” in the login line and “mtsoao” in the password line.
After identification, in the window that opens, you can see specifications router: model, serial number, firmware version, device chip version, and router password.
For wireless connection wired access via Wi-Fi, you need to go to the "Network" tab located at the top. Next, open the "WLAN" submenu on the left side of the window, and find the "Basic" subsection.
In the first column "Wireless RF Mode" set the value to "Enabled"
In the "mode" line, select "Mixed (802.11b)"
Region – Russia
Line "Chanel" - mode "Auto".
In "Transmitting power" select "100%".
Press the button to save the entered settings - "Submit".
Next, open the "Multi-SSID Settings" submenu (Fig. 3)
In the line "SSID Name" you need to come up with and enter the name of the network, then click the "Submit" button.
Open the "Security" submenu and paste the following values:
Enter the previously created password in the "WPA Passphrase" line, which will be the network key. To ensure network security and avoid unauthorized access, the password must contain at least 8-10 characters of the Latin alphabet, it is desirable to use both upper and lower case characters, as well as numbers.
To save, click on the "Submit" button.

If all these steps are performed correctly, and the device is in working order, you can connect various devices to Wi-Fi access.

If you decide to reset your router to factory settings, you need to reset the user settings as follows:

With the router turned on, you must hold down the reset button "Reset" for 30 seconds
While continuing to hold the button, turn off the mains power, and hold the button for another 30 seconds.
Reconnect the device to the network, and hold the button pressed for another 30 seconds.

If everything is done correctly, the router should return to factory settings.

How to download and install firmware on the router

If errors appear on the router, for example, with regular Wi-Fi outages, for no apparent reason, the router can be reflashed. But this is done at your own peril and risk, as this will void the factory warranty. According to the MGTS agreement, the router belongs to the provider company, and not to the user. And in case of unsuccessful firmware, the user will have to pay the cost of the router.

In order to flash the router, you need to download official version from the website of the equipment manufacturer ZTE, or contact

Setting up a ZTE router is one of the main steps in connecting to a network.

Moreover, regardless of which connection is used to access the network - wired or wireless - it will take a little time.

It does not affect the settings and models of routers - only the speed of access to the Internet and the way it is distributed to computers and other equipment depend on this characteristic.

Router selection

ZTE is one of the largest manufacturers electronics, including routers.

And, although by far the most popular are wireless routers, receiving the Internet via wireless 3G and 4G channels, one of the best options for buying can be universal models.

That is, such devices that can receive and transmit data using a cable, and in other ways (mobile communications, Wi-Fi).

The ZTE brand provides potential customers of its equipment with a wide range of different models that differ in functionality, speed of network access and data transfer.

All modern devices, even from the lowest price categories, provide wireless (Wi-Fi), and many even connect to the network in the same way.

Thus, even relatively cheap models meet the requirements of most users.

Although, as a rule, the higher the price of the router, the more features it provides - including a wide range and a clear signal.

One of the most important characteristics of the router is the number of antennas - the more there are, the greater the gain.

An even more convenient option is a router with the ability to connect additional amplifiers.

It is this technique that should be chosen for a large apartment and, moreover, for a private house, the territory of an entertainment center, a cafe or an office.

ZTE E5501

A popular router, released back in 2014, but still popular and sold online at a price of about 1000 rubles, is the ZTE E5501.

The advantage of the model is an attractive design (not so important, but still taken into account when buying a characteristic), support for 802.11n wireless technology and the presence of two antennas that amplify the signal by 10 dBi.

And a small drawback is the inability to connect a 3G modem and use other methods of connecting to mobile communications.

Rice. 1. A little outdated, but still quite functional and stylish ZTE E5501 router.

ZTE ZXHN H118N

A newer model ZTE ZXHN H118N with a price of about 1000-1200 rubles. already has USB port for a modem that allows you to connect to the network using mobile technology.

At the same time, there is also a WAN connector for wired access.

And the data is transmitted to other devices located within the range of the router, both via cable (4 LAN ports) and via Wi-Fi.

Rice. 2. ZTE ZXHN H118N - for wireless and wired network access.

ZTE 5502

Another model, in terms of functionality and price (about 900 rubles), reminiscent of the E5501 router, also looks quite stylish.

However, it has practically no advantages over other devices - only wired access is possible, and the network is distributed only in one range (at a speed of about 300 Mbps).

Although the ZTE 5502 encrypts information quite reliably (using WPA-PSK, WPA2, etc. technologies).

Fig.3. Bright and functional router ZTE 5502.

ZTE MF283

The MF283 model is capable of receiving the Internet using both 3G and 4G technologies (connection via a SIM card), and with two wired connections.

In addition, you can connect a USB drive to the router to download information from the network directly without a computer, and a telephone cable.

And, therefore, such a router will be an excellent option for both a large house and an office.

Moreover, the antennas of the device are removable, and can be replaced by more powerful elements.

Rice. 4. Model MF283 - a router with replaceable antennas and connection to a mobile network.

ZTE MF28D

The router works great both with wired connections (broadband and telephone) and with a mobile network.

It is worth noting that the wireless connection is provided not with the help of 3G / 4G modems, like most routers of this type, but due to the SIM card installed in it.

And up to 2 antennas can be connected to the device, each of which amplifies the signal by 3 dBi.

Rice. 5. Router MF28D - for working with 3G / 4G Internet and wired connection.

Preparing for setup

Before connecting a router of any selected type, you should first check its contents. The router should come with:

power unit;
Ethernet cable for connecting to a wired network (except for options for connecting to the Internet using only mobile technologies);
instructions, warranty and software CD.

The network cable is connected to the WAN port (less often - ADSL, if the connection is made through the telephone network).

Another cord is installed with one side into the LAN connector on the same router (you can choose any port from LAN1 to LAN4), and the second one into the corresponding RJ45 slot on the network card of a computer or laptop.

Important: When connecting two networks from different providers to the router at once (for example, via WAN and mobile communication) it is also desirable to install a splitter to filter the signal. And you can increase the coverage with the help of additional antennas.

Rice. 6. Connecting the cable to the network card of the laptop.

After connecting all the cables, you can turn on the router using the button located on the back.

The next step is to check the connection using the indicators on the front panel of the ZTE router. Here you can see signals showing:

to which connector the PC (laptop) is connected;
Is the wireless connection working?
whether there is a network connection.

If your device is connected to the Internet and a computer, and the wireless connection is working, you can continue to configure the router.

For this, a web interface is used, which is present on any Wi-Fi router.

And after setting up the device, you can use it without a computer - just turn it on to connect with any gadget, including tablets and smartphones.

Creating an Internet connection

Management of ZTE routers for wired and wireless connection is carried out using a special interface, to which you can connect by specifying an address like 192.168.1.1 in the browser (you can specify this value in the data sheet of the router).

If the device is already connected to the PC, after entering these numbers, a settings window appears on the screen where you need to:

Enter username and password. By default, instead of each of them, the word admin is entered (if desired, they can be replaced by any others);

After filling in the fields, click on Login;

In the window that opens, select the Network section;

Open the WLAN tab in turn (sometimes you can select it immediately from the list, without going to the Network tab), and then Basic;

Select the WirelessRFMode column;

Change status from Disabled to Enabled;

Press the Submit button, ensuring the inclusion of wireless data distribution.

Important: Most often, when connecting with a cable, the network is detected automatically. If this does not happen, you may need to update or install network card drivers. And then set up a new connection.

Now that Wi-Fi is enabled, you can set up the connection itself.

In the WAN Connection menu, PVC0 is selected in the Connection Name line, and Route is set in the Type line.

After that, you need to choose to enter a name and password for the connection (when connecting PPPoE type), which will be used to enter the network.

The ADSL network is configured in much the same way, although the transition is to a different tab.

Rice. 7. The process of connecting the router.

If the connection is made using a 3G / 4G connection, the setting is carried out through another tab - 3G WAN Connection.

Here, only the APN access point name is selected (you can find it on the provider's website or check with the company's technical support).

The rest of the settings are usually set automatically.

You should know: Depending on the model of the router, the names of the tabs may differ. For example, the access point name is sometimes required to be entered on a separate APN Settings tab. At the same time, all user actions will be approximately the same.

Additional sections

In addition to setting up a network connection, the user of the ZTE router has the ability to change other parameters:

for example, in the Multi-SSID section, you can make the network both open and closed;
the name of the connection is changed in the SSIDName column;
the maximum number of simultaneously connected devices is set in the MaximumClients item (most models support up to 32 connections simultaneously);
in the EnableSSID item, the network can be enabled or disabled;
The HideSSID section allows you to hide the wireless network.

Rice. 8. Setting up the protection of the router.

If there is a Security section in the settings menu, where you can select a WPAPassphrase encryption key with a length of 8 to 32 characters.

As well as the Authentication encryption type and the appropriate WPAEncryptionAlgorithm information transfer protection algorithm.

When setting a password, you should be guided by a number of rules.

First of all, choose a combination consisting of at least 8 characters, including both lowercase and uppercase letters, as well as numbers.

In addition, it is undesirable to use the names and dates of birth of users as passwords.

Features of settings for different providers

Setting up ZTE routers is slightly different depending not only on the device model, but also on the service provider.

Among domestic providers, users most often choose the services of Rostelecom, Beeline and MGTS.

In addition to the fact that these operators have the maximum coverage of the territory of the country, a wide range of tariffs can be found in the list of their services.

When configuring the router to work with the Rostelecom network, you must not only enable Wi-Fi (according to the standard method), but also perform the following steps:

In the Mode column, set Mixed (802.1b+802.11g+…);

In the Country paragraph, put Russia;

In the Channel section, Auto is selected;

Transmitting Power should be set to 100%.

After completing these items, configure the Multi-SSIDSettings section. To do this, first check the box EnableSSID, in the column ChooseSSID - SSID, in SSIDName - the network name is selected.

For the correct operation of the ZTE router, which must work in the MGTS or Beeline network, the same steps are performed as with the standard connection setup.

That is, entering a password and login, activating Wi-Fi and setting the parameters of the Multi-SSID sections. At the same time, routers of this brand are no longer used for ADSL connections.

WiFi router ZTE E5502 overview of interface settings

Setting up a ZTE router is an important step in connecting to the Internet. detailed instructions setting up your router

Setting WiFi router ZXV10 H208L and ZTE ZXHN H208N. Detailed instructions for setting up the Router mode and creating a wireless WiFi network.

The ZXV10 H208L (ZTE ZXHN H208N) device combines the functions of an ADSL modem, wifi access point, SIP telephony client, and a router at the same time. The modem has one external port - WAN (Wide Area Network) and four internal - LAN (Local Area Network). WAN is used to connect network internet modem cable. LAN ports provide connection of various devices (PCs, laptops) to the internal network. The modem is configured via the Web interface. To access it, you need a browser, such as Google Chrome.

Customization features

We can configure it as follows: in Bridge mode (the Internet will be connected to only one computer), in Router mode, or to open ports.

In Router mode, the Internet connection is made directly through the modem. The advantage of the modem in this mode is the possibility of simultaneous use of the Internet by various devices (tablet, smartphone, PC, etc.). To set up wifi, you must first set up the Router mode.

Setting up wifi on byfly modems, in most cases, is a simple process that does not require special knowledge and skills. Please note that before setting up wifi on byfly modems, you should perform the following operations.

You need to install your modem model (ZXV10 H208L or ZTE ZXHN H208N).
Check if the modem is connected to personal computer or laptop via network cable.
Make sure you have a working connection when connecting to the Internet with a network cable.
Set up wifi on the byfly modem according to the instructions.

Setting to Router mode

The ZXV10 H208L device (ZTE ZXHN H208N) is initially in Bridge mode, that is, there is access to the Internet from only one PC, to switch to Router, you must follow the instructions below.

Setting up the ZTE ZXHN H208N modem. Setup of the ZTE ZXHN H208N modem

Setting modem ZTE ZXHN H208N router, setting WiFi, IPTV Setup of the ZTE ZXHN H208N modem in a router, the

Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom

Detailed description of DSL wi-fi ZTE router zxhn h108n, setting by master and manually Internet, interactive TV, wi-fi

Launch your browser, preferably Internet Explorer, write down the parameters of the router - 192.168.1.1

Read also

How to setup Xiaomi phone A: Redmi, Note 4 are not others. Only basic optionsNewsRead the detailed annotation helpful tips how to set up Xiaomi phone. Web, WiFi, language is not a fingerprint sensor. The answer is not simple in one article. Everyone knows ...

How to authenticate Samsung smartphone a50Along with the high technology associated with new model Samsung phone A50, people tend to think that they can get the same features at a much lower price. Due to lack of awareness...

Sometimes you are very annoyingly called or sent messages by a subscriber who does not want to hear, in other words, it's just spam and similar unwanted contacts. In order to prevent this, it is enough to block them to permanently get rid of this...

Dropped iPhone. the screen does not work If you dropped your iPhone, the screen does not work, first you need to calm down. The consequences of a fall can be severe, but there are effective ways to fix a malfunction in your phone alone.

How to install Russian language on Smartphone HUAWEI(honour)?. Most smartphones in the world are developed and assembled outside of Russia. Therefore, the main language of the smartphone interface is also not Russian. Usually, when you turn on your smartphone for the first time, you will be prompted ...

Open a browser, enter http://192.168.1.1 in the address bar

A new tab will open. Set the Username field to admin, and the Password field to admin. Click the "Login" button.

Navigate to the Network Interface/Network menu.

Next, fill in the Connection name, you must select the PVC0 option, and if it is absent, Byfly.

The bridge connection needs to be removed. To do this, click on the "Delete" button.

A new tab will appear. Enter the name of your connection in the New Connection Name field, for example, PVC0. Next, go to the VPI / VCI field, where you should enter 0/33. Enter the information from your contract in the appropriate Username and Password fields, click the "Create" button.

If there is no Internet connection, it is worth checking the correctness of the Username and Password information.

WiFi setup

For implementation wifi settings on the ZXV10 H208L or ZTE ZXHN H208N device, you must press and hold the "Wlan" button for about 20 seconds, after which the corresponding indicator should flash. We enter the settings of the router as indicated above.

Go to the Network Interface tab.

Read also

How to change SmartHub region for Samsung KPosted 08.02.2017 by andreyHow to change SmartHub region for Samsung K Preparatory TV setup Replacing the IP address Installing (unlocking) Samsung smarthub From the off state ...

This 60% Wi-Fi Water Leak Detector only does the basics, but it does them well. There was an error emailing this page.

How to connect your phone to a computer via usb: Solutions to the problem How to connect your phone to a computer via usb if it does not connect for removable media, but only charges? A very common problem for users who use...

Oppo launches its new smartphone called Oppo A31. This device comes with many new features and modern technologies. Recently, 91mobiles posted a poster featuring an Oppo A31 designed for a triple rear camera setup...