Sometimes users have questions about how to get a SIM card out of an iPhone. We will look at the standard method, as well as methods in case the staple from the kit is lost and when the tray gets stuck.
1. Standard way
The iPhone usually comes with a needle, also called a key. If it is not available, other means can be used in the same way, to which we will return.
To complete the task with the key, do the following:
- Use a paperclip to press the mechanical button located on one side of the connector cover.
- You will hear a click and the cover will come off.
- Remove the connector with your fingers.
Depending on the iPhone model, this connector may be on the side or on the top. But the iPhone 4, 5, 6 always has it on the side.
2 .What if there is no paper clip
It happens that the standard key is lost. But you can get a SIM card without a key.
You can use a needle, dental probe, paper clip or any other sharp, thin and oblong object. They just need to press the mechanical button on the connector cover, and it will move away.
This process is clearly shown in the video below.
3. When the card is stuck
Pulling out the SIM card if it is stuck is quite problematic, but possible.
To do this, take an additional knife or something thin, for example, a small plastic plate that can be cut from an ordinary bottle. Insert it between the tray and the case, and then carefully pull out the connector with your fingers.
How to do this is shown in the video below. If nothing works, contact Apple Service Center for help.
Each of the users of Apple products at least once faced with how to pull a SIM card out of an iPhone? In this article, we will figure out how to get a SIM card from an iPhone correctly without damaging the smartphone and SIM card, what cases occur when a SIM card is removed from an iPhone, and what to do in such cases.
The procedure for removing a SIM card in all iPhone models is significantly different from the process of removing cards from others. mobile devices. In an iPhone, you can get a SIM card without opening the back cover of the case, without taking out the smartphone’s battery, that is, you can change the SIM card without stopping the device. Agree, it is quite convenient in many cases. For example, you download a program or work with an application and you need to change your SIM card at that moment. You simply remove the card slot, change the SIM card and close the slot without stopping the running work, except for the termination of the 3G Internet function.
If you are faced with the problem of removing the SIM card, then, if this does not damage your work, it is better to turn off the power of the smartphone by pressing the button located on the top of the iPhone case or on the side, depending on the model. When a message appears on the device screen: “Slide to power off”, you need to swipe your hand over it so that your smartphone turns off.
Now you can proceed to the very process of extracting a SIM card from a smartphone. First, you will have to look on the outer right panel of the case for the slot in which your SIM card is hidden. V iPhone versions 4, 4S, 5, 5S, 6 and 6 Plus card slot is located on the side of the case. In earlier versions of the iPhone, it is located at the top of the case, near the power button.
As a rule, when selling an iPhone, it is already equipped with a special sharp key to remove the card. The key must be inserted with a tip into the narrow hole of the sim port and remove the sim card. Then you should use your fingers to remove the tray from the phone and take the card in it.
It seems that there is nothing easier than pulling a SIM card out of an iPhone by pressing a special hole with a key and the SIM port with the card will pop up. Yes, only this needle-key, as always, is lost at the right time, and usually at the moment when you are in a hurry or late. This process becomes catastrophically inconvenient.
It happens that the manufacturer did not initially equip the iPhone with such a key. How to remove the card in this case? In fact, everything is simple. It is enough to use an ordinary paper clip or a sharp toothpick. With a slight pressure, pressing into the hole, the simslot easily slides out along with the phone card. By the way, you need to press the hole with a key to remove the card at an angle of 45˚. Often a paper clip is used because it is always at hand, but thin wire can also be used. It is advisable to always have a keychain with keys on the road, among which there will be the necessary special key to open the slot and remove the microcard. With this little forethought, you will save yourself from unnecessary worries along the way.
How to get a sim card if it's stuck
Unfortunately, sometimes it happens that the SIM card gets stuck in the slot, and the slot itself opens to a small part. How to open an iPhone? If it is not very convenient for you to contact a service center to fix such a problem, you can try to remove the card yourself.
To do this, find a thin but hard film (for example, a piece of a plastic folder), stick a piece of a long plate into the slot between the SIM card and the iPhone case and, pressing it against the screen, start to get the plastic out. As a rule, in this case, the pulling out ends with the card being pulled out of the slot far enough to pull the rest of it out with your fingers.
After removing the card, the SIM port must be closed or covered if you are going to re-insert the SIM card. When inserting the SIM card back into the slots, make sure that the card sits in the tray, like a puzzle, in the desired position. Now easily insert and push the SIM card tray back into the slot hole with your finger. Press lightly on the back of the slot with your finger to snap the closure into place.
For the future, there is advice: for prevention, treat the edges of the SIM card with fine-grained sandpaper before inserting it into this slot so that in the future it will not be a big problem to remove the SIM card and it will not get stuck in the slot cell.
Articles and Lifehacks
If you suddenly want to change your iPhone to another phone, but save the information on your SIM card, then neatness and a simple paperclip or a special key that comes with the iPhone will help you remove the SIM card from the iPhone at home.
Standard extraction method
- Turn off your gadget. To do this, press the power button located at the top for a few seconds. The screen will display "Slide to power off" or "Turn off".
- Swipe across this inscription from left to right. Your machine is now off.
- Find the sim port on the top or side (it depends on the model). In models 4, 4S, 5, 6 and 6 Plus, it is located on the side of the case. In earlier ones, at the top of the iPhone, next to the power button.
- Usually, a key is included in the kit, which opens access to the SIM card. Just insert it into the small hole on the sim port and remove the sim card.
- After removing the SIM card, do not forget to insert the slot into place.
Removing a SIM card without a key
- If such a special key was not included in the kit, then an ordinary paper clip will help you. Straighten it and, acting like a key, insert it into the hole next to the SIM port.
- In no case should you use a needle: there is a risk of spoiling the system for fixing the SIM card slot in the iPhone. Some use a dental probe or a thin awl for the same purpose.
- Be extremely careful when using such folk methods of extracting a SIM card from an iPhone: the slot may get stuck.
- If the SIM card is still stuck, then do not rush to the iPhone service: you can even fix this error at home using a folder film or a model knife.
- Gently insert them into the hole between the iPhone case and the SIM port from the side of the phone screen and pull the plate, slightly pressing the SIM card slot against the screen.
Apple developers have carefully thought through everything in advance with the issue of removing the SIM card: it would seem that you press the key and you don’t have to suffer. But this special needle strives to hit somewhere, and if you need to change the card quickly and in an unexpected situation, then you won’t be able to remove the tray from either the iPhone or the iPad without improvised means. Luckily, there are several proven working methods to finally get that ill-fated SIM card out.
Ordinary situation
Let's assume that it will be possible to remove the SIM card without complications, and we will turn to a technique based on the principle of replacement. By removing the tray with the key, you do nothing but a little mechanical action: the needle simply activates the mechanism and is not the only object suitable for this. It is quite possible to pull out the tray by replacing the needle with an ordinary paper clip, which must first be straightened a little. The tip of a paperclip works just as well as a special needle in activating the drawer mechanism, and in most cases your problem will no longer require any other tricks or tools. 
Oh yes, if you have never removed a SIM card from an iPhone on your own, be it 3, 4, 4s, 5s or 6, then first you have to find the right slot. For different models, it is in different places, but always has an oblong shape, similar to an oval.
- The slot is on the right side of the iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s and iPhone 4 GSM, iPad Pro, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini.
- The tray is located at the top, next to the power button, on older models: iPhone 3GS, iPhone 3G, iPad 4, iPad 3, iPad 2 Wi-Fi + 3G GSM. At the same time, when trying to get a SIM card from iPads, you need to insert a paper clip into the key slot not perpendicularly, but at an angle of 45˚.
- The slot on the bottom left can only be found on iPad Wi-Fi + 3G.
The use of a paperclip is most popular due to its availability and versatility, but if a paperclip is not available in your situation, it can be replaced with other similar items. The end of a large needle or wire for these purposes is quite suitable.
When the sim gets stuck...
Did you use the paperclip trick, the tray popped out, but you couldn't pull it out completely? Most likely, the matter is in the SIM card, which unsuccessfully got up in the tray, preventing the tray from being removed from the slot. The main thing at this stage is not to be nervous: trying to pull out the SIM card with physical effort, you risk breaking the mechanism. In this case, even if the tray goes back into the slot, it will not stay in it, and you will have to fix it in the case with tape or tape.
Better take a needle or a blade and try to lay the SIM card so that it does not interfere with the movement while you remove the tray. Yes, the work is painstaking and can take a lot of time, but this problem is completely solvable if you have a little patience and show a bit of skill. Just do not stick the needle too deep inside the case: there are other parts and elements that can be damaged by inaccurate movement as easy as shelling pears.
You can also simply tap the gadget on a table or other surface: if the card is loose in the tray, this can help it return to the desired position, and you can pull the tray out completely.
Many owners of iPhones and iPads slightly process the edges of even new purchased SIM cards with fine sandpaper as a prevention of this problem. This will make it easier for the card to be positioned in the tray even if it is in a spacer, as rough edges and plastic burrs will no longer get in your way.
If the tray does not eject completely
You don’t need to fanatically press the button with a paper clip if, with light or moderate pressure, the tray does not come out of the iPhone or iPad. Most likely, in your case, you will have to contact the service center for help, unless, of course, you have the useful skill of disassembling and assembling such equipment. And it’s certainly a bad idea to try to pull out the tray mechanically: picking with a knife and other sharp objects will not only ruin the look of the equipment, but can also lead to more serious damage if a piece of the tool breaks off and remains inside. You don't want your favorite 5s or 4s to suffer even more, do you?
Often a complete blocking of the slot occurs when the used SIM card was cut out from an old one that did not fit the parameters. Believe me, the reissue of the card will be much faster and will require much less money than a similar breakdown of an iPhone or iPad. Do not be too lazy to replace the card so that later you do not have to contact the service center for help because of your own indiscretion.
Some problems with an iPhone or iPad, such as removing a SIM card without using a key, can be solved on your own, but the main thing is to remember that service centers exist for good reason and are also ready to help in a difficult case. Dare, but adequately assess the situation and do not panic!
When buying a new or used iPhone, you need to insert a SIM card into it. How to do it?
When you start using a new phone, you definitely need to insert a SIM card into it or change it. Basically, in order to open the slot for placing a SIM card in it, you need to remove the back panel of the phone and take out the battery. But such an operation will not give you anything in the case of an iPhone. Therefore, many users have a completely reasonable question, how to get a SIM card from an iPhone.
We will consider the process using the example of older iPhone models. You can do this with the active device, but it is recommended to turn it off.
You will need a special key, somewhat reminiscent of a small paper clip.
It is inserted into the hole near the SIM card slot, which will open it. Next, remove the opened tray and replace the SIM card in it or insert a new one
If we talk about newer models, then they have a SIM card slot on the other side. And the operation process itself is no different
What to do if there is no key?
Many show imagination and poke into the tray, for example, with a needle, which is absolutely impossible to do. This can greatly harm the system of its fixation.
Here it is better to use a paper clip. Although, someone uses toothpicks or even an awl for this.
What to do if the SIM is stuck?
It may also turn out that the tray has opened, but the SIM card itself is stuck in it, and you cannot get it out. This situation is very relevant for device versions higher than the fourth, since they use micro-sim.
Of course, if you want, you can seek the services of specialists. But who wants to pay for what he can do himself, and without money at all? To get a stuck SIM card, find something thin but strong. For example, a model knife. Place it in the gap between the case and the slot. Now gently, pressing the slot against the display, pull it.
Video: How to get a SIM card out of an iPhone - how to insert a SIM card into an iphone?
Calls, messages, internet - it all depends on this accessory. Therefore, it is important to figure out how to insert a SIM card into an iPhone, pull it out, and what types of cards you need to purchase for Apple devices.
Standard SIM is not suitable for modern iPhone models - it is too big. You can buy a new one. But it costs money. And if you have some phones recorded on the old card, they need to be transferred. It's easier to cut the SIM.
The card must be in a special "tray" iPhone. But in older gadget models, it can be inside the device. And to get it or insert it, you have to remove the back panel and pull out the battery. Before you open a SIM card on an iPhone, you need to find out where it is.
Look at the body of the device. On iPhone 4, 5, 6 and SE, the tray is on the side. In the 3G series - from below. In the closed state, it can only be recognized by the contour and a small hole nearby (with its help, the SIM card is removed).
If there is nothing like this in your device, then the SIM must be inside. To pull it out:
- Turn off the device. To do this, hold down the lock button. A red slider will appear on the screen. Move it to the side. In some cases, it must be clamped.
- Open the back of your phone. If it does not detach, then the SIM card should not be inside.
- Pull out the battery.
- It has a sim slot. Next to it are instructions on which side to insert it. On the SIM, they always make an oblique angle so that you can see where she has the “top”.
- It must be placed with the chip down so that it is adjacent to the contacts of the phone.
- Pull the SIM out of the slot if you need it. And just like that, you can shove it back.
- The card can be fixed with a cover. Pry it with something thin to open it.
Here's how to remove a SIM card from an iPhone if it is located in the tray:
How to crop
V different models Apple devices support different SIM formats. You can pull out the tray and see which card is used in your gadget. It should also be stated in the instructions. Or in the device information on the official Apple website.
A regular SIM card can be cut to Micro-SIM and Nano-SIM if it has an "extended" chip. With a large square contact, this will not work, since one of its functional parts will be “cut off”.
All new sims have serifs. It is enough to press in the right place to get a Micro- or Nano-version. Unnecessary plastic just breaks off. If there is nothing similar, it is best to purchase a special kit for cutting a SIM card (it is somewhat similar to a stapler). Or take it to an Apple phone store and entrust the work to professionals. If you do it manually, there is a risk of damaging it.
If you decide to cut the SIM card yourself, you will need sharp and durable scissors, a well-sharpened pencil and a ruler. In the process, the main thing is not to damage the chip and cut off only the plastic. If you already have a SIM of the right size, just put both cards together and cut off everything you don't need. Or measure the tray. You can also find a template with the size of a SIM card on the Internet and print it on a printer.
Remember where her “corner” is (or mark with a pencil). In the cropped version, it will also have to be done. Otherwise, it will not be clear which side to insert the card.
Micro SIM
Micro-SIM has dimensions of 12 × 15 millimeters. To crop it:
- Lay it on the table so that the chip is on the top right. Before each operation, it is better to outline the lines with a pencil. They must be drawn parallel to the sides of the chip.
- At the top, cut off part of the card so that 1 mm of plastic remains before contact. Do not touch the chip.
- On the right, leave 1.8-2 mm of plastic.
- You need a rectangle 12mm high and 15mm wide. It should be proportional to the card that you have now. Initially, its sides are also different sizes.
- Draw lines for the rectangle. Mark where the corner will be in it.
- "Uncut" is better than "cut". If the SIM is too large, this can be corrected. If it turns out to be too small, it can't be fixed.
- Now cut out your Micro SIM.
- The corner must be cut diagonally (at 45 degrees). If you don't have a protractor handy, measure the bottom and left of the 2.5mm SIM. Draw lines. Where they intersect with the edges of the SIM card, cut off a piece. The corner must always be on the same side.
- Try inserting a card into the tray.
Micro-SIM is used in iPhone 4 and 4s. Modern models are compatible with Nano-SIM.
Nano SIM
In a miniature SIM, only the chip and some plastic remain (to cut off the corner without hitting the contacts). Its dimensions are 12.3 × 8.8. It is quite difficult to measure with such accuracy. It's okay if you're half a millimeter wrong. Nano SIM cards are thinner than usual. Therefore, you will need a nail file or sandpaperto erase the plastic layer.
Here's how to cut a SIM card on an iPhone:
- Lay it on the table so that the chip is on the top right.
- On the right, top and bottom, cut off all the plastic. Before that, draw the lines along which you are going to cut, and note which side the corner is on. Be careful not to accidentally damage the chip.
- On the left, leave 1-2 mm of plastic.
- Carefully cut off the corner.
- File away the plastic layer on the card to make it thinner. Don't scratch the chip.
Figuring out how to get a SIM card from an iPhone and insert it back is not so difficult. Worse, if the SIM does not fit. Then you have to cut it. Or buy a new one.
Practical and at the same time presentable "Iphone 4" conquered its users with ease of use and technical reliability in operation.
Some uncertainty, or How to get a SIM card out of iPhone 4
A fairly standard situation can affect everyone: the purchased phone does not show any obvious signs of the presence of a SIM card slot. The device monolithically gleams with a sparkling body, making it clear that the apple is not so easy to crack. And yet, how to get a SIM card out of the "iPhone 4"? If you did not participate in the process of introducing the subscriber's electronic ID into the phone and did not attach importance to the importance of what is happening, as a result, now you are in a state of complete ignorance: where does the SIM come from, and how to remove it from the phone? And the situation associated with the replacement of the number arose right now. The new SIM just longs for the digital embrace of the mobile “wonder”. But the “invisible” SIM card slot is still undetectable. An incredibly simple solution lies in the design features of the brainchild. Let's see how this “dream” device works.
An ingenious device for ordinary people
The iPhone case hides “great secrets” that deserve absolute attention. Therefore, the question of how to get a SIM card out of iPhone 4 becomes quite natural. The conservative design of Apple products has a number of advantages, which are expressed in an advantage over competing analogues. 
And the advantageous differences lie in the convenient location of the navigation keyboard, instant tactile feedback and other winning features, including the location of the SIM card slot. The owner of the Iphone does not need to open the case, remove the battery and install the SIM card in a cleverly designed SIM receiver. It is enough to have a special paper clip (pin or needle) with you and find a hole in the right end side, which is a kind of internal mechanism that will open as soon as you act on it with a short press of the paper clip. After inserting the card, slide the slot-receiver. Now the question of how to get a SIM card from iPhone 4 has become resolved for you.
Inappropriate slot size, or Why is it not in place?
Iphone 3rd generation has changed the location of the slot for the SIM card. How to pull out a SIM card from an iPhone 4 if there are only buttons on the right side? This is solved in the following way. The SIM card for such phones is inserted from above, next to the "on / off" button. It should be noted that the SIM card itself, designed for Iphone service device must be micro-Sim format, that is, have smaller dimensions. In a specialized store where you can buy everything for iPhone 4, you will definitely be helped to “convert” the SIM card format. In principle, household scissors cope with such a task with a bang. If you are sure what and how you will do, carefully cut the edges of the card - the main thing is to be careful and attentive so as not to damage the electronic chip. Before cutting, measure the dimensions of the notch in the SIM card tray, only then proceed. Good luck to you!
Anyone who has used iPhones knows that in these devices the SIM card is located not like in other mobile devices - under the back cover and battery, but in a special slider that is hidden in the side panel of the phone. At first, this may be unusual, but on the other hand, this design is due to the fact that the entire body of the iPhone is monolithic, you cannot disassemble it yourself. Therefore, in this article we will talk about how to get and insert a SIM card correctly.
How to get a SIM card from iPhone 4?
So, the mechanism by which you can get a SIM card from a smartphone is designed in such a way that you must first insert a special key that comes with the kit. You need to stick it through the hole, which can be found on the side panel of the iPhone 4. As a result of this, you will see that the slider in which the card is located will protrude a few millimeters above the surface. Then you just need to hook it with your nails or some thin object and pull it out. Inside you will see a SIM card. You can easily take it out using the slot in the card tray, which is on the bottom. It is enough just to pry the SIM card, and it will fall out on its own.
What to do if the key is lost?
The key, with which the card is taken out, is made in the form of a needle with a handle, by which it must be held. Due to its small size, it is very easy to lose it. As a result, you may be interested in the question of how to get a SIM card from iPhone 4 without a key.
We note right away that you should not get lost, since this can be done with any other thin object, including a toothpick or a needle. True, when using the latter, one should be extremely careful - the tip can damage the mechanism from the inside, after which it will be difficult to get the card. You should not forcefully press on the needle, plunging it into the hole - a little effort is enough, and everything will work out.
Even better, if you want to know how to get a SIM card from an iPhone 4 with a needle, we advise you to ask a friend who has experience with this to do it for you. Then you can simply repeat all his actions and remove the SIM card from your smartphone without the risk of damaging your iPhone. However, procedures such as getting a card should not be carried out very often, so the need for them is rather one-time. In any case, you should know how to do it.
What should be the SIM card?
Do not forget that before you get a SIM card from iPhone 4, you also need to clarify its dimensions. As you know, there are three formats in which SIM cards are offered: classic, microSIM and nanoSIM. If you have an iPhone 4, then you need the "micro" format, and if your device belongs to the 5th generation, then only "nano" will do. So when you buy starter pack, ask the seller to immediately cut your card to the desired size, if you have not already done so. It is quite difficult to cut a SIM card at home on your own: there is a risk of damaging the card.
What can not be done?
So, now about what you absolutely cannot do if you don’t know how to get a SIM card from iPhone 4. First you need to carefully handle the object with which you will try to replace the key. Since its ending can be sharp, don't press too hard on it to avoid causing damage. Also, do not apply excessive force so as not to break the key itself (or what replaces it). If something remains in the hole, it will be difficult to clean it later and remove the card from the phone.
In addition, you need to be careful with the slider itself, placing the card there. So, first you need to place the SIM card itself in the correct position. After that, making sure that everything is in order, you can close it by placing the card inside the case. In order for the phone to see the map, you need to reboot.
