Many modern laptops are equipped with a Bluetooth wireless adapter for data transfer. It allows us to use ordinary radio waves (short range) to connect to a wireless network and get full access to peripheral devices: printers, mice, phones, communicators and other computers. This is very convenient, as these devices can be moved within reliable reception and automatically maintain communication. “How to set up Bluetooth on Windows laptop 7?” This review is devoted to this issue..
Setting up Bluetooth in Windows 7 starts with reading the specifications of the laptop and making sure that the laptop has a built-in adapter and it is turned on. Before starting the setup, install the appropriate drivers. Then we run “Add Device Wizard” to automatically detect a new device. To do this, you need to click "Start" and in the search bar type “Devices”.
Find “Device Manager” and search for new devices in it (RMB-> “Update hardware configuration”). If the result is positive, then the wireless adapter will be displayed in the list (usually in the corresponding item “Bluetooth”). When the adapter is on, it indicator light should turn blue, when it is turned off, change the glow to yellow, and when the power is turned off and the laptop goes into sleep mode, it will turn off completely, interrupting the connection.
To further configure Bluetooth in Windows 7 on a laptop, open it from the system tray and find the “Settings” item. Computer visibility will be disabled by default, which prevents unnecessary power consumption. Enable this option. The laptop should now be visible to other devices such as smartphones. To create a paired pair of Bluetooth connections, we will use another menu line - "Add Device". A list of found visible devices. We need to select the one we need and click “Next”, while the system will request the appropriate security password, which is set in the connected gadget. The time allotted for input is limited. Keyboardless devices (headphones, mice) will be connected without a password, you only need to specify the desired connection option.
We have covered in some detail how to set up Bluetooth on a Windows 7 laptop.. After performing operations in the Bluetooth icon menu the line “Show Bluetooth devices” should become active. When you go there, you will be given an individual right to manage connected wireless devices. Problems with connection and communication can occur when devices are far apart from each other (more than 7-10 meters), with dead batteries and incorrect settings. Check all Bluetooth device settings for visibility. If everything you have done is done correctly, then the devices will find each other and begin to exchange radio signals.
The last remark will concern one more setting that may prevent the connection of devices in this OS. If during all the dances with a tambourine the connection is not established, then you should go back to “Bluetooth Settings” and go to the “Discovery” tab. There click (if this option is not enabled) on “Allow Bluetooth devices to discover your computer”.
Now you know exactly how to set up Bluetooth on Windows 7 - apply your knowledge and enjoy a wireless connection.
Watch video on YouTube: “How to set up Bluetooth on a Windows 7 laptop”.
Bluetooth (bluetooth - “blue tooth”) is a special wireless communication standard, that is, using electromagnetic waves. It is used to connect two mobile devices and transferring data between them. This technology was originally developed in order to ensure the operation of a wireless headset in mobile phones, which allowed hands-free conversations. But this is not limited to the use of this technology in a laptop and other mobile gadgets - it can also be used to transfer files.
Everyone has long known another wireless standard - Wi-Fi. What is the difference between the new standard and Wi-Fi? Their main differences are:
- different frequency bands.
- Bluetooth has a shorter range.
- When using bluetooth, there is no need to configure the hardware configuration.
- This standard cannot be configured local network, i.e. connect more than two devices at the same time.
- The “blue tooth” has a significantly higher transmission speed.
As a rule, a wireless radio module is already built into a modern laptop. But if it is not there (or one of the subscribers is a desktop PC), then you can buy an external adapter. It resembles a flash drive and connects to a USB port.
You can find out if a Windows 7 laptop has a built-in radio, as well as see its status and enable it using the Task Manager. To do this, go to the control panel, select "Administrative Tools", open "Computer Management" in it, then select "Device Manager". If there is no Bluetooth radio in the list of installed devices, then there is no bluetooth module in the laptop. If it is, but next to it an interrogative or Exclamation point, then this means that the adapter drivers need to be updated or reinstalled, but this is a topic for a separate article. When you buy an external adapter, it usually comes with a driver CD. After the device driver is installed, Windows 7 will detect it, and the user will be able to verify this by similar actions.
This condition in a laptop with Windows 7 can occur for three reasons:
- The radio adapter is off and needs to be turned on.
- The adapter is defective.
- Adapter drivers are not installed or need to be reinstalled.
We are only interested in the first case - when the corresponding adapter is turned off and you need to turn it on. This can be done in several ways.
The standard way to turn on Bluetooth
In the notification area of the panel Windows tasks 7 there is an icon for this radio module.
To set the adapter state, you need to click on it, a menu will appear. Next, click on the "Add device" item.
With hardware
There are laptop models equipped with hardware on/off buttons for the adapter. If there is one, then it must be set to the ON position.
Power on with the Fn key
Most laptops have an Fn key on their keyboard. It is designed to manage the status of various equipment installed in the computer, including bluetooth. Top row keys are function keys (usually F1 - F12), pressing which, together with Fn, performs such control. In a laptop, depending on its manufacturer, the blue tooth state control key may correspond to various function keys, as a rule, these are F3-F5. The corresponding icon should be indicated on such a key.
Sometimes both wireless adapter are made in the same module, so they are turned on and off at the same time using such a function key.
Via Device Manager
How to enter the Windows Device Manager has already been said at the beginning of the article. Entering it, you can see a picture with a list of all installed devices.
We are interested in the item "Bluetooth radio modules". Open it, select the appropriate adapter and right-click on it. If this module is enabled, then the menu that appears will contain the "Disable" item, otherwise, the "Enable" item. That's what you need - click on it, the adapter turns on.
Enabling the radio module with third-party utilities
Depending on the manufacturer, there are a number of third-party utilities that can enable the radio adapter. These are utilities such as:
- Wireless Console (ASUS laptops).
- ReadyComm (Lenovo laptops).
- Utility Center (HP laptops).
They are all very easy to use and easy to find online. After installing them in Windows 7, the Bluetooth logo icon appears in the notification bar. Right-clicking will bring up a menu with an item called "Enable/Disable Bluetooth Adapter".
Using the command line
This method of turning on the radio communication module is more difficult than all those described above, therefore, it should be resorted to only if none of the methods already given helped. For this inclusion, you will need the DevCon utility - it is easy to find it on the Internet and download it. If it is downloaded in an archived state, then the archive must be unpacked. The program must be placed in the C:\Windows\system32 directory. In addition to this utility, you will also need an identifier (ID) of the radio module. It can be found using the Windows 7 Device Manager.
In it, open the item "Bluetooth radio modules", right-click on the desired module and select "Properties" in the menu that appears. A window will open in which you need to go to the "Details" tab, and in the "Property" drop-down list, select "Hardware ID". In the "Value" window, the first line contains the ID of the selected radio module.
Next, enter the mode command line. To do this, click "Start", enter cmd in the bottom search line, a window opens, in the top line of which is the value "cmd". We click on it, a window for entering the command line opens. In it, enter a line like devcon enable ID (without quotes). Instead of ID, you must specify the hardware ID obtained from the device manager. Press Enter, the DevCon utility is launched, which turns on the disabled radio module. 
In contact with
The Bluetooth wireless connection is still widely used to connect to a computer with many varieties of wireless devices– from headsets to smartphones and tablets. Below we will tell you how to turn on the Bluetooth receiver on PCs and laptops under Windows control 7.
Before starting the connection, the equipment must be prepared for work. This procedure takes place as follows:
- The first step is to install or update the drivers for the wireless module. Notebook users just need to visit the official website of the manufacturer - the right software is easiest to find there. For users of stationary PCs with an external receiver, the task is somewhat more complicated - you will need to know the exact name of the connected device and look for drivers for it on the Internet. It is also possible that the device name will not give anything - in this case, you should look for service software by hardware ID.
- In some specific cases, you will also need to install an alternative Bluetooth manager or additional utilities to work with this protocol. The range of devices and required additional software is extremely diverse, so it is not advisable to list them all - let's just mention Toshiba laptops, for which it is desirable to install the proprietary Toshiba Bluetooth Stack application.
Having finished with the preparation stage, we proceed to turn on Bluetooth on the computer.
How to turn on Bluetooth on Windows 7
First, we note that the devices of this protocol wireless network enabled by default - just install the drivers and restart the computer for the module to work. However, the device itself can be disabled via "Device Manager" or system tray and may need to be enabled. Consider all options.
Method 1: "Device Manager"
To start the Bluetooth module through "Device Manager" do the following:
Wait a few seconds for the system to take the device to work. This does not require a restart of the computer, but in some cases it may be necessary.
Method 2: System Tray
The easiest way to turn on Bluetooth is to use the shortcut icon located in the tray.
Done - Bluetooth is now enabled on your computer.
Solving popular problems
As practice shows, even such a simple operation can be accompanied by difficulties. We will consider the most probable of them below.
There is nothing similar to Bluetooth in "Device Manager" or system tray
Entries for a wireless module can disappear from the hardware inventory for a variety of reasons, but the most obvious would be a lack of drivers. This can be verified by finding in the list "Device Manager" records "Unknown Device" or « unknown device» . We talked about where to look for drivers for Bluetooth modules at the beginning of this guide.
For laptop owners, the reason may be to disable the module through special proprietary utilities controls or key combination. For example, on Lenovo laptops the combination is responsible for enabling / disabling wireless communication Fn+F5. Of course, for laptops from other manufacturers, the desired combination will be different. It is inappropriate to list them all here, since the necessary information can be found either in the form of the Bluetooth icon in the F-key row, or in the documentation for the device, or on the Internet on the manufacturer's website.
Bluetooth module does not turn on
This problem also occurs due to a variety of reasons, from OS errors to hardware failure. The first thing to do when faced with such a problem is to restart your PC or laptop: it is possible that a software failure has occurred, and cleaning random access memory The computer will help you deal with it. If the problem persists even after a reboot, you should try reinstalling the module drivers. The procedure looks like this:
If the problem was in the drivers, the instructions above are aimed at fixing it. But if it turned out to be ineffective, then most likely you are faced with a hardware failure of the device. In this case, only contacting the service center will help.
Bluetooth is on but can't see other devices
Also an ambiguous failure, but in this situation it is exclusively of a software nature. Perhaps you are trying to connect an active device such as a smartphone, tablet or other computer to a PC or laptop, for which the receiver device needs to be made discoverable. This is done by the following method:
After pairing the PC and external device, the option "Allow Bluetooth devices to discover this computer" It's best to disable it for security reasons.
Conclusion
We have got acquainted with the methods of enabling Bluetooth on a computer running Windows 7, as well as solutions to the problems that arise. If you have any questions, ask them in the comments below, we will try to answer.
What is Bluetooth (Bluetooth) - a convenient and easy-to-use device with which people exchange data.
There is a relevant question, how to turn on bluetooth on a computer? Consider options with different Windows release series.
How to turn on bluetooth
Read also: TOP 12 Best Wi-Fi adapters for PC or laptop: USB, PCI, PCI-e | Rating 2019
Bluetooth is a simple device and turning it on is not difficult. The only thing is that you need to install drivers for it to work properly.
They can not always be found bundled with the device itself when buying in a store. Often you have to search and download on the Internet. Don't worry - it's not hard.
If you want bluetooth to work correctly, install licensed drivers.
Enable on Windows 7
Read also:[Instruction] How to change the password on a Wi-Fi router: TP-Link, D-Link, Zyxel Keenetic, Asus | 2019
Let's see how to turn on bluetooth on a computer with Windows 7.
Some PCs have built-in bluetooth. If you don't have one. You need to purchase it separately in the store along with an adapter.
It is also necessary to know whether you received the driver along with the data transfer device? If yes, then install them.
If not, you need to find the exact name of the device and rummage around the Internet in order to find these very installation programs and download them.
In order for the device to start functioning, you need to combine it with a computer - connect it. Then turn it on and make it so that the user can find it.
Then you need to click on "Start", select "Devices and Printers" and go down to the item "devices". Here you need to search for the name of your PC, then right-click on it "bluetooth settings" and choose your computer name.
In the tab "bluetooth settings" checkbox must be checked "disable bluetooth adapter".
Now you need to connect the Bluetooth itself.
There are 2 options:
1 First option: "Start" / "Devices and Printers"/ “Devices” / now you need to find your computer by name and right-click on it. / "Bluetooth Settings"/RS name/ disable " Bluetooth adapter» . Ready.
2 Second option: Right-click on the icon « Bluetooth devices» . It is located on the taskbar. Then find and activate the item "Enable Adapter". Ready
Activate the item "Enable adapter"
In the future, the connection between the computer and the bluetooth will be maintained independently and established at the moment when they are in each other's coverage area. It is done.
Now let's look at how to turn on bluetooth on a laptop.
Turning on on a laptop
Read also:[Instruction] How to set up a router: TP-Link, D-Link and other brands | 2019
When buying a laptop, the kit comes with a disk with software. If it is not there, you need to go to the manufacturer's website and find and then download everything you need. Install the driver.
The computer will now see the new hardware. This will show up in Device Manager. Install the utilities to work properly. Their task is to connect to devices even without a wired connection.
Now let's get down to the PC itself.
Sometimes the question is relevant - where to find bluetooth in a laptop. Go to the task manager - it's there.
If the device is not active - “enable it”
Enable on Windows 10
Read also:Bluetooth (Bluetooth) does not see the device? How to solve a connection problem
Let's see how to turn on bluetooth on a computer in Windows 10.
You need to follow a few steps to connect bluetooth to Windows 10 on a laptop. Again, we determine whether the drivers with the adapter are installed? This can be done through the task manager.
Go to "Device Manager"
We go to the control panel, open the window "hardware and sound". We need a section "devices and printers", and in it "Task Manager". Open it.
You need to scrupulously examine the list and find the Bluetooth column, click on it and get into a dialog box where you can see if the adapter is connected.
If an unknown device is written, this may mean that the adapter is connected, but the drivers are not installed.
Even if you have to install it yourself, it will not take much time. Stick the device into the USB port and wait for Windows to install everything itself.
- Now it's time to find out if it was included?
- When the bluetooth is turned on, its icon is visible in the panel quick settings at the bottom
In the event that your computer does not have unknown devices nor the Bluetooth tab - this means that there is no adapter at all.
Bluetooth adapters are quite common these days. With this device, you can connect various accessories and gaming devices (mouse, headset, etc.) to a computer or laptop. In addition, we must not forget about the standard data transfer function between a smartphone and a computer. Such adapters are integrated into almost every laptop. On stationary PCs, such equipment is much less common and often appears in the form external device. In this lesson, we will explain in detail how to install the Bluetooth adapter software for operating systems. Windows systems 7.
You can find and install software for these adapters, as well as any devices in fact, in several ways. We offer you a series of actions that will help you in this matter. So, let's begin.
Method 1: Official website of the motherboard manufacturer
As the name suggests, this method will only help if you have a Bluetooth adapter integrated into the motherboard. Finding out the model of such an adapter can be difficult. And on the websites of the board manufacturer, there is usually a section with software for all integrated circuits. But first, let's find out the model and manufacturer motherboard. To do this, perform the following steps.
- We press the button "Start" in the lower left corner of the screen.
- In the window that opens, look for the search string below and enter the cmd value into it. As a result, you will see the file found above with the same name. Let's launch it.
- In the command prompt window that opens, enter the following commands one by one. Don't forget to press "Enter" after entering each one.
- The first command will display the name of the manufacturer of your board, and the second - its model.
- After you have found out all the necessary information, we go to the official website of the board manufacturer. AT this example This will .
- Every site has search string. You need to find it and enter your motherboard model into it. After that press "Enter" or a magnifying glass icon, which is usually located next to the search bar.
- As a result, you will find yourself on a page where all search results for your query will be displayed. We are looking for our motherboard or laptop in the list, since in the latter case the manufacturer and model of the motherboard are the same as the manufacturer and model of the laptop. Next, just click on the product name.
- Now you will be taken to the page of the specifically selected equipment. This page must have a tab "Support". We are looking for such or similar in meaning inscription and click on it.
- This section includes many sub-items with documentation, manuals and software for the selected equipment. On the page that opens, you need to find the section in the title of which the word appears "Drivers" or Drivers. Click on the name of such a subsection.
- The next step is to choose operating system with the obligatory indication of the bit depth. As a rule, this is done in a special drop-down menu that is located in front of the list of drivers. In some cases, the bit depth cannot be changed, since it will be determined independently. In a similar menu, select the item Windows 7.
- Now, below on the page, you will see a list of all the drivers that need to be installed for your motherboard or laptop. In most cases, all software is divided into categories. This was done for easy searching. We are looking for a section in the list Bluetooth and open it. In this section, you will see the name of the driver, its size, version and release date. Without fail, there must be a button that will allow you to download the selected software. Press the button labeled Download or the corresponding picture. In our example, such a button is the image of a floppy disk and the inscription "Global".
- The download of the installation file or archive with the necessary information will begin. If you have downloaded an archive, then do not forget to extract all its contents before installing. After that, run from the folder a file called setup.
- You may be prompted to select a language before starting the Setup Wizard. Choose your choice and press the button "OK" or "Further".
- After that, preparations for installation will begin. A few seconds later you will see the main window of the installation program. Just click "Further" to continue.
- In the next window, you will need to specify the location where the utility will be installed. We recommend leaving the default value. If you still need to change it, then click the appropriate button "Change" or Browse. After that, specify the desired location. At the end, press the button again "Further".
- Now everything will be ready for installation. You can find out about this from the next window. Click the button to start the software installation. "Install" or Install.
- The software installation process will begin. It will take several minutes. At the end of the installation, you will see a message that the operation was successful. To complete, press the button "Ready".
- If necessary, reboot the system by clicking the appropriate button in the window that appears.
- If all actions were performed correctly, then in "Device Manager" you will see a separate section with a Bluetooth adapter.
wmic baseboard get Manufacturer
wmic baseboard get product
On this this way completed. Please note that in part it may be useful for owners of external adapters. In this case, you must also go to the manufacturer's website and through "Search" find your device model. The manufacturer and model of the equipment is usually indicated on the box or the device itself. 
Method 2: Automatic Software Update Programs
When you need to install software for a Bluetooth adapter, you can turn to specialized programs for help. The essence of the work of such utilities is that they scan your computer or laptop and identify all the equipment for which you need to install software. This topic is very extensive and we devoted a separate lesson to it, where we reviewed the most famous utilities of this kind.
Which program to give preference - the choice is yours. But we strongly recommend using . This utility has online version, and the downloadable driver database. In addition, it regularly receives updates and expands the list of supported hardware. How to update software with using DriverPack Solution, described in our lesson.
Method 3: Search software by hardware ID
We also have a separate topic devoted to this method due to the amount of information. In it, we talked about how to find out the ID and what to do with it next. Please note that this method is universal, as it is suitable for owners of integrated adapters and external ones at the same time.
Method 4: Device Manager
One of the methods listed above will definitely help you install drivers for your Bluetooth adapter. After that, you can connect various devices through it, as well as transfer data from a smartphone or tablet to a computer and vice versa. If during the installation process you have any difficulties or questions on this topic, feel free to write them in the comments. Let's help you figure it out.
