The android lies on its back. Android phone won't turn on past the logo (doesn't want to boot)

08.11.2020

Safety

Now let's figure out why your Android phone does not load beyond the logo (it does not turn on after the manufacturer's or robot's splash screen). Further in the text: first about the reasons and then decoding what to do in this or that case.

This article is suitable for all brands that produce phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, ZTE, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question to a specialist at the end of the article.

If you divide all the reasons why your Android phone hangs on the logo splash screen and does not boot further, then this will be

errors in software (you can fix it yourself);
problems with the "hardware" (only in the service center).

The reasons for the breakdown and why it turns on, but does not load

⭐️⭐️⭐️⭐️⭐️ If Android does not load on your phone or tablet when you turn it on, or your Android smartphone starts up but does not go beyond the logo splash screen, then the reasons for this may be the following:

Errors when flashing the device. These include the installation of an unsuitable or damaged assembly, incorrect firmware order, power failure, and other factors.
Out of memory. The system may not start or due to insufficient memory. Removing unnecessary data can be a solution.
Memory card incompatibility. If the smartphone turns on but does not boot completely, try removing the memory card and trying to restart the system.
Hardware problems after being hit, dropped, spilled, or exposed to extreme temperatures.
Damage to the power button or its cable, which "closes" the phone and it goes into a cyclic reboot, loading up to the logo and then in a circle. We come across this periodically and can only be diagnosed in a service center.

Before trying to fix a problem with Android, you need to understand why the system does not boot.

Recovery of performance

If the phone shows that the charge is on, then the causes of the problem should be looked for in work Launcher Android... If the device vibrates or the screen flickers, then there is a possibility that the screen is damaged.

If you have determined that the problem is software in nature (for example, the problem arose after a firmware update), then a simple reboot will not help here. You need to reset the system through Recovery Mode or flash the device. Let's see what to do:

While holding the power button and the volume down key (there may be other combinations, look for your model), go to Recovery Mode. If the phone, then the problems are at a deeper level, so you need to contact service center.
Perform a factory reset by selecting "Wipe data factory".
Select "Reset" to reboot the device.

This will delete the user's personal data and settings. If this method did not help, perform a flashing. To do this, drop the file with the appropriate firmware into the root of the memory card, insert the drive into the phone and select “Install zip from sdcard” in Recovery Mode.

Enlarge

You can handle a software glitch yourself, but how do you fix a hardware problem? The most reasonable option is to contact a service center for diagnostics and repairs.

Extracting information from non-working Android

Even if the problem can be solved without financial investments, by a simple flashing, users have an important question - how to save the data that is stored in the phone's memory. There are no problems with the memory card: you just need to pull it out of the device. But how do you save data from your internal storage? For example, pull out contacts.

Enlarge

If you did backup system, or at least, it will be very easy to get contacts. All you need to do is go to the Contacts app on Google to see a complete list of your synced contacts. If you want to transfer them to another device, then it will be enough to add a Google account to it.

Has your Android smartphone turned off? Bring it to us!

If the phone screen shows an exclamation mark, and the green android (operating system symbol) is lying, it means that the operating system of your device is lying.

Android lies - Exclamation mark on your phone!

The system refuses to work because:

the android is damaged by a virus;
an application incompatible with the OS was installed;
the phone was flashed incorrectly (ineptly) or with an incorrect OS version.

How to raise android?

1. Even a non-commercial antivirus reliably protects the system from malware. Ignoring the risks of viral damage is more expensive.

2. In case of incompatibility with the application, the problem is treated with the "reset" button. After rebooting, the device will most likely work.

3. It is guaranteed that the exclamation mark on the phone will disappear, the android will again greet the user after flashing - installing the Android OS on the formatted drive of the gadget. But you can try to raise the system without flashing, by resetting to factory settings. For this:

we enter the settings menu using a combination of touch keys: home, power and the volume down keys, holding them together (provided that the home key is available), we wait for the service menu to drop out;
select yes in the menu using the touch volume control, the device should reboot automatically;
if it is not overloaded, select the rebootsystemnow menu item.

Important!

Resetting to factory settings will lose all user data (photos, recordings, etc.). Cheap Chinese smartphones are dropping Cyrillic and Latin support. In order not to have problems with decoding hieroglyphs, and even more so not to damage the "stuffing" with unqualified firmware, it is better to immediately contact a specialist at the nearest service center. The service also provides a guarantee of maintenance of the restored software. To store personal data, it is better to use computer hard drives or flash drives.

In the event that you are a simple user and you have no time to figure out how to remove exclamation marks on your phone, lying androids or other misfortunes, then the simplest thing is to contact the CHIP service center. Our experts will put the operating system of your gadget in order in a short time and at an affordable price. Phone flashing is one of the most demanded services among our clients. Bring your sick gadget and literally in an hour or two pick it up completely healthy!

The phone "Fly Phoenix 2" was discharged at night, I went to bed, this morning I wake up and put my device on charge, it "came to life" on its own, after which it gives the error "there is no command", after which I wanted to make a recovery through a script on the SD card , but I had it as the main memory, I took it out and put the card with the script, after that it stopped turning on altogether, I'm sitting there charging, waiting for answers. June 6

I have a tablet wecsler taBMW 10q showed that there is no connectivity, I put it on reboot and the virus got out with resurrection. No sign and name of the Ivanovich team on June 3

I recently took over his Explay phone from my brother. It worked properly. I walk, walk, decided to get the phone out of my pocket, slipped out of my hands, fell down, insert the battery, turn on, on the screen a picture with a lying bot, which symbolizes an android, it has a lid open, a triangle next to the lid, and in a triangle "!" I was scared, the phone was expensive, and my mother would kill me too, with fright she began to poke anywhere. Then I began to solve the problem in this way - I open the lid\u003e carefully pull out the battery\u003e insert the battery\u003e insert the lid\u003e hold down the power key. Hurray! The phone turned on as usual. I had this 5 times. 5 May

Tel Filipok W6610, everything works except reset. I make backgammon, the corpse of Andrew is displayed with the inscription no command. I tried to remove unnecessary junk manually. After rebooting, everything returns to its place. And the new account is not saved ... April 30

Tel. Samsung Geleksi2 recumbent android team did not give it back for repairs, nothing happened. I gave it to. Tell me, please, what can it be? Thanks. 6 april

I have Explay Rio Play. I did a factory reset. It seems that I did everything as it should, but when the phone turned off, the inscription "No command" came out. I've tried everything, but for some reason nothing comes out. Please help ((March 31

I have a Tesla Neon I7.0 It happened in July 2016 I put the tablet on charge overnight. I wake up there is no tablet. It turns out he is on the floor with the charger connected and writes. I was scared that my dad would scold me and I went for a walk. Then I came home and turned off the tablet and then turned it on and it all worked! He probably fell. Try this will help you March 25

Yesterday everything was fine, in the morning it was necessary to rearrange the alarm clock, there was no connection to the alarm clock, I decided to restart, restarted, and when the phone turns on, there is no command. March 14th

The problem is the same does not turn on the droid lies upside down with its belly once got up but fell again. Just another plus for my virus, he ruined all my gadgets. The laptop and the other phone are still breathing, trying to fight, and Lenovo a2010 immediately became a little boton. There is also my fault, it established the root of the right of just memory, always by zeros. Now he is completely forgetful. Lying around. Firmware option via PC DO NOT OFFER. Thanks. For earlier. March, 3rd

Hello. I have tel. BV6000. The problem arose after updating the software to 7.0-anroid. Applications have crashed. I am trying to enter the mode menu to reset everything to the old version of android-6.0, my lying android lights up with an exclamation mark. Help with advice please. 2nd of March

I received a notification about a software update, I turned on the updates, the update passed, after that the update began in background, after that the update error message appeared, after that the phone rebooted when turned on, the command no appeared and the lying droid with! sign, help! 16 february

on samsung galaxy s6 I can’t turn on the firmware mode (I simultaneously hold down the Home buttons, the sound down, and the on button) and the screensaver (Samsung galaxy s6) just loads and nothing else happens. How can I turn on the firmware mode differently? The 25th of January

The firmware on the DEXP ixion E145 has flown, the recovery starts android lies with an exclamation mark nothing helps the firmware is not installed writes an error will the drivers help before the firmware and who has it? all actions without access to a computer are needed. January 6

Ordered on Ali phone Original Oukitel K4000 Pro MTK6735P When turned on after 5 minutes, it started to turn off and on itself, the seller advised resetting to factory settings. Done, now when you turn it on, there is no command on the screen ((

What to do if Android is lying with an exclamation mark? In this article, we will consider the main causes of device malfunction and ways to solve it.

The first version of the Android operating system appeared in 2008. The presence of a large number of functions, ease of use and low price in comparison with analogs made it affordable for a wide range of users. It is not surprising that the issues related to the long and uninterrupted operation of devices with this operating system are very relevant.

An on-screen android icon with an exclamation mark indicates a software malfunction on the device. It can be associated either with the installation of an unlicensed program, or with a virus infection.

Photo: Android lies with an exclamation mark

Usually, the user may encounter such a problem when turning on (rebooting) a smartphone or tablet. If this happened to you, what can you do?

The first thing that is offered in such cases is this. To do this, you need to turn off the device, if necessary, recharge it to 100% and turn it on in the menu for developers. Since the key combination depends on the smartphone or tablet model, we recommend that you refer to the instructions. In the standard case, this can be done by simultaneously holding the power buttons, volume down and / or Home.

In some cases, the smartphone after this action can return to factory settings automatically, but sometimes it needs to be done manually. Remember that only buttons work in this state (you cannot use the sensor). You will have to use the volume keys to move up and down through the menu items. In the list, you need to select the position "Wipe data / Factory reset" with the power button or Home button, which means "delete data / reset settings" and in the next window that opens, confirm your choice.

The main disadvantage of this step is that it removes everything from your device that is not the factory default. And these are contacts, messages, photos, audio and video recordings and the programs you installed. Therefore, if you do not want the safety of your data to depend entirely on one electronic device, make backups in advance.

If you are not sure that you can cope with this task on your own, it is better to consult a specialist, because any mistake can lead to disastrous consequences.

If the "USB debugging" function is enabled in the android settings, you can reflash the device,.

Photo: USB debugging

Photo: USB debugging

We unpack the already downloaded folder with the program on disk C. Check for downloaded drivers for your smartphone and install if they are not. Turn off the device, use the key combination to enter it into the firmware mode and use the cable to connect it to the computer. Then follow the instructions of the program.

If you did not connect the ability to debug your smartphone via USB cable, consider another option to reinstall the software using the device itself and a flash card. To do this, you will have to return to the previously described menu by selecting the restore using SD option.

Photo: Flashing Android

In both cases, at the end you will have to reset the system to the original settings again.

To summarize: Android lies with an exclamation mark - this is not an easy problem, but it can be solved. If you do not want to encounter it often, be careful what you download to your device. Be sure to install.

You can fix the problem either yourself or with the help of a specialist by resetting the settings or reinstalling the software.

Dear Readers! If you have any questions or comments on the topic of the article, please leave them below.

If you have ever tried to flash either or an Android tablet on your own, then you probably came across the concept of "Recovery". Today we will talk in detail about what this thing is, why it is needed at all, and, of course, how to enter it.

What is Recovery

Recovery mode is a special boot mode for android devices that allows you to perform a full reset of the operating system, reflash the device, back up the entire system or its individual partitions (just like restoring these partitions later) and some other things. At the same time, for this mode to work, the operability of the operating system itself is completely optional. That is why the recovery menu is often accessed when the device no longer works in normal mode. And that's why this mode is called "recovery" (from the English. "Recovery").

How to enter Recovery

To boot recovery, the hardware buttons of the device are usually used. The most common combinations are:

However, some manufacturers may come up with "something like that", so you have to search and experiment.

If everything is done correctly, a lying robot will appear on the device screen, on top of which there will be a menu with commands.

Another way to download recovery is special applications with which you can reboot your smartphone or tablet into recovery mode directly from the operating system itself (for example, Reboot menu). However, keep in mind that these applications require a.

Navigation in recovery mode is carried out mainly using the volume buttons, and selection using the power button. There are also devices in which only the volume down button is used for navigation, and the volume up button is used to confirm the selection.

To all of the above, it is necessary to add one important detail. The functionality of the recovery mode itself is by no means universal, and can be quite different depending on the device. Particularly distinguished in this sense were "noname" tablets from China and some B-brands, the recovery of which lacks any list of commands at all.

Mobile OS is not as reliable as it might seem. Mistake "No command" Android is a clear example of this. A fallen brand with a red triangle completely paralyzes the smartphone and nothing can be done with it.

Reasons for the "No Command" bug

The reasons for the bug are pretty critical damage OS or internal modules. Only something very serious can cause the operating system to crash. Sometimes users are to blame themselves, as they tried to reinstall the OS using files with questionable firmware. It may be a fault or a common technical failure during the operation of the device.

Error "No command" in Android

How to fix the "No command" error

Before doing the following, you should apply all the simplest steps - reboot with removing the battery, memory cards and SIM cards.

Method number 1 - reset to factory settings

When turning the phone into a "brick", you can try to restore the manufacturer's settings. There are many options for these actions, but we need the option with a dead smartphone. There is a dedicated team designed to remove such bugs.

Method number 2 - Flashing

This is an extreme, but an effective solution when you see that your Android is lying with an exclamation mark, and Hard Reset does not help. If you have not done such OS changes before, then trust flashing phone to someone more experienced. You can try to install the latest OS release, or vice versa, roll back. If something goes wrong after reinstalling change version and the source of your software. There is really a lot of low-quality content now.

In dead phones, the firmware file is uploaded into the phone's memory via a USB cable through a computer, with the subsequent activation of the installation. There is enough information on the web about this.

Breaking

All devices break. In such cases, you need to either try to identify the cause yourself or contact the service center. What can be checked: removable memory cards, closed contacts on connectors, battery, correct assembly of all parts, moisture. If you suspect serious defects, you need to seek advice from specialists.

As for the battery, it is worth mentioning that sometimes it is enough to simply pull it out and insert it. There are references to solutions through its complete replacement, when the old one has already exhausted its working resources. If the device gets wet, it is better to buy a new battery right away.

Conclusion

From the above, it is worth drawing one conclusion - the "No command" error on Android is written only during serious problems, therefore formatting the phone, flashing and repairing the main methods of recovery. I hope you figured out what to do about the "No Command" problem in smartphones and tablets. Huge request - if you have another solution, please describe it in the comments.

There are quite a few problems associated with the operation of smartphones, tablets and other devices on which the Android system is installed. One of the most common and at the same time complex is the problem in which a notification about the absence of a command is displayed on the device screen. What should the user do in such a situation?

Possible reasons

There can be quite a few reasons for this behavior of the device, which, nevertheless, does not complicate the process of its solution.

A whole list of smartphone manipulations can act as factors contributing to the appearance of such an error. These include:

Smartphone software or OS update that did not complete properly;
, during which there were problems;
Memory damage and other technical problems of the smartphone caused by falling, flooding and other typical incidents.

By itself, the cause of the breakdown is unlikely to help solve the problem, but it will help to avoid the appearance of similar problems in the future.

Solution to the problem

When the command error no android appears, what should the user do in such a situation? There is no need to find out the exact reason that entailed such unpleasant consequences. It is enough just or, in some cases, to reflash the phone.The reset procedure is quite simple and is implemented very similarly in all modern devices. To perform it, you should:

When you turn on the smartphone, hold down the volume button, after which a menu will open
In it, select the WIPE data factory item, after which a reset will occur.
Sometimes, during the procedure, the smartphone may "ask" what to do with the user's data. In most cases, they should be removed for the device to work correctly.

The process of flashing is somewhat simpler than resetting, however, it also has its pitfalls. These include the need to fully charge the smartphone in order to avoid switching off during manipulations. As a rule, the firmware update is performed by standard tools supplied either with the product on the disk, or presented on the device manufacturer's website.

Mobile OS is not as reliable as it might seem. The "No command" error in Android is a clear example of this. A fallen brand with a red triangle completely paralyzes the smartphone and nothing can be done with it.

Bug reasons

The reasons for the bug are quite critical damage to the OS or internal modules. Only something very serious can cause the operating system to crash. Sometimes users are to blame themselves, as they tried to reinstall the OS using files with questionable firmware. It may be a fault or a common technical failure during the operation of the device.

Error "No command" in Android

How to fix No Command error

Before doing the following, you should apply all the simplest steps - reboot with removing the battery, memory cards and SIM cards.

Method number 1 - reset to factory settings

Method number 2 - Flashing

This is an extreme, but an effective solution when you see that your Android is lying with an exclamation mark, and Hard Reset does not help. If you have not done such OS changes before, then entrust the flashing of your phone to someone more experienced. You can try to install the latest OS release, or vice versa, roll back. If after reinstalling something went wrong, change the version and source of your software. There is really a lot of low-quality content now.

In dead phones, the firmware file is uploaded into the phone's memory via a USB cable through a computer, with the subsequent activation of the installation. There is enough information on the web about this.

Breaking

As for the battery, it is worth mentioning that sometimes it is enough to simply pull it out and insert it. There are references to solutions through its complete replacement, when the old one has already exhausted its working resources. If the device gets wet, it is better to buy a new battery right away.

Conclusion

From the above, it is worth drawing one conclusion - the "No command" error on Android is written only during serious problems, so formatting the phone, flashing and repairing the main methods of recovery. I hope you figured out what to do about the "No Command" problem in smartphones and tablets. The biggest request - if you have another solution, describe it in the comments.

What if the tablet won't turn on

It so happens that in the process of passing games or working on the tablet, it stops working and does not turn on. The main reasons can be conditionally divided into two categories: problems with the hardware of the device are malfunctions of the battery, connecting cables, boards or some problems with the software - incompatibility of programs, operating system flew off or incorrectly installed after the update process.

Let's take a closer look at individual cases of tablet malfunctions.

There are absolutely no signs of life
1. The simplest and most commonplace reason is a completely discharged tablet battery. To check this version, plug it in and wait at least 10-15 minutes. Only then will the tablet be able to accumulate the minimum amount of energy to turn on. Hold the power button on the device body, wait for the screen to light up. If the screen turns on, check the condition charger - take another and do the above. The tablet turned on, but the charging process is not progressing, you need to find out if why the tablet is not charging .

2. If a child has played with the tablet, it may have damaged it by hitting the floor or corner of furniture. Most likely, part of the display has suffered, in which case it can be replaced. The tablet itself is in working order. Screen damage is usually visible to the naked eye.

3. If the device had no mechanical damage, a rare case - the video adapter is out of order.

If you find such signs and there is a valid warranty for the device, run to the salon and wait for repairs, it is simply unreasonable to make repairs yourself.

The patient is neither alive nor dead

When the tablet turns on, but not completely, but freezes during the boot process (there is only a splash screen on the screen), we are dealing with a software failure.

The reasons may be as follows:

1. Some programs or games are not installed correctly.
2. You forcibly terminated the work of system processes, possibly through third-party software or a task manager.

Procedure:

You can try to save the tablet by resetting the system to factory settings. It is best to find some data on this on the Internet, because each device model has its own nuances. Or use the program hard reset... Using these instructions, you can reduce the procedure to the following:

1. Turn off the device.

2. Remove the sim card and memory card.

3. Hold down the volume up key (on some models - down) and the button to turn on the tablet. Hold for about 10-12 seconds

4. If the tablet vibrates and a menu appears on the screen, you are on the right track. Select Settings, then Format Systems.

5. Resetting the system - Reset Android.

6. The tablet will reboot with factory settings.

7. Try this scheme several times, it should work.

If unsuccessful, read the information on “ How to unlock your tablet”. In addition, an excellent option for resuscitating the device is flashing tablet ... In case of unsuccessful firmware of the device, here are some good practical tips.

Exclamation mark on a lying android

If an image of a lying green android appears on the screen of the device, and there is an image of a red exclamation mark on it, you are in stock Recovery mode. There is nothing wrong with it. Need install modified ClockWorkMod Recovery... You got into it, because when you entered a combination to reset the settings, you made a mistake, because each tablet model has its own combination. Press the power button and hold it for a while until the device turns off, you can just wait 3-5 minutes until the device shuts down on its own. In the most extreme case, you can do the flashing again.

What is Fastboot

The user can get into the mode Fastboot mode, in this case, the android also lies on the screen, but there is no exclamation mark. You need to use the volume buttons to get to the menu item Restart bootloader , we make a choice with the power button, sometimes it helps to revive the tablet.

Remember that each device model has its own "chips". Some tablets easily reset the settings after pressing the home button while the android is lying down, others react only to simultaneously pressing the plus and minus buttons in volume control for a long time.