Almost all modern smartphones and tablets are equipped with an LED flash, which is mainly used for photography and as a flashlight. In turn Apple found her one more, no less interesting application. Starting with the fourth generation iPhone, the flash can function as a flasher to visually signal the call.
Is this flasher needed
Initially, the idea of using an LED in a flickering mode was intended to help people with disabilities (hearing impaired) not to miss incoming calls and SMS notifications. But over time, the situation has changed. Today, many young people deliberately turn on the flashing light, thus trying to draw the attention of others to their fashionable gadget. However, this method does not always have a positive effect. Some people may be annoyed by this flicker, especially at night.
The LED flasher can help girls quickly find an iPhone in their bag among many different accessories. It is also worth noting that the flickering extends to the alarm clock as well. This means that at the moment the alarm goes off, in addition to the melody, frequent flashes of the LED will be visible in the room, provided that the iPhone lies with its screen facing down. To determine if there is any benefit from the flasher for you, you should turn it on for a few days on your iPhone. But keep in mind that this will speed up battery drain.
So how do I turn on the flash blinking?
The procedure for turning on the LED flasher is extremely simple and is completed in just a couple of minutes. To do this, go to the "Settings" section and find the line with the name "Basic". Then touch the specified line, after which a list with many sub-items will appear on the screen. 
Among them, you should find and click on the "Universal Access" item. 
Leafing through the items of the newly opened section, you need to find and select the line with the name "Flash of warnings". 
After its activation, all incoming calls and messages to the iPhone will be accompanied by a melody with a bright optical effect.
The developers of the iPhone running iOS 10 have additionally equipped it with another option - "Flash in silent mode", which is also in the "Accessibility" menu. To enable it, the user needs to do two things:
- turn on the switch located next to the option name by sliding your finger across the screen;
- switch the switch located at the end of the phone to the "Silent" position, at which its orange part will become visible.
After these steps, at each incoming call or SMS, the smartphone will vibrate and flash brightly with the LED.
Sometimes iPhone owners complain that for some reason the blinker does not work immediately after enabling the option. In this case, you should reboot the device and try to answer the call again. In this case, the following nuance must be borne in mind. Periodic flashing of the iPhone is possible only if its screen is turned off. If the device is not in standby mode (screen is active), the LED will not blink.
How to disable
Turning off the LED flasher on the iPhone is done in the same way as turning it on. To turn off the flash during incoming SMS and calls, re-enter the "Universal access" menu and slide the switch on the screen to the inactive position.
By the way, not only owners can turn on the LED blinking function during incoming calls iPhone version above iOS 5. It is also available in some other smartphones. In particular, activation of the flasher is available by default in devices MIUI firmware, and on a smartphone with Android OS, you will have to install the Flash On Call application.
Read the same
Apple places a lot of emphasis on the functionality of their devices, but few know how to turn on flash when calling on iPhone... The company implemented this feature with people with disabilities in mind, in particular hearing impaired. Thanks to the light signal, the person will miss calls less. When the smartphone is in the pocket, the call message will be transmitted by vibration, and when placed on the surface, the light notification will most likely reach the user.
Flash on call
How to turn on the flash on a call iPhone 7 - the technique is very simple and does not require additional tools or tricky settings. Thanks to the procedure, you can turn the flash, which is only activated when the camera is running, into an excellent source of light. Thanks to bright lighting, it is possible to illuminate the area and provide sufficient visibility for a person.
The developers have built in the ability to set blinking when calling in silent mode. The function is not automatically active, but it can be turned on at the request of the user. This feature is useful when the smartphone is lying on a soft cloth and does not create audible or perceptible vibrations. The technology is based on LED flash.
Turning on the flash on the iPhone when making a call is a useful function not only for people with hearing aid problems, even a completely healthy person may like the opportunity. The smartphone does not create audible inconveniences in a quiet room, for example, when all household residents are already asleep, but the message remains visible. When you call, a flashing flash appears, which is visually noticeable even in the daytime, and in the dark it will be difficult to ignore.
To stand out from the crowd and in silent mode, setting the flash is easy. The function is available to everyone who has a device that supports operating system iOS 7 and up. It was in this platform that the flashlight function was introduced, and accordingly it became possible to control the flash not only for taking photos, but also for lighting, notification, etc.
To complement the vibration with flash, just follow a simple procedure:
- Select the item "Settings", can be found on the desktop of the device.
- You need to go to the "Basic" category, where most of the basic parameters are present.
- Activate the transition on the item "Universal access".
- Among all the sections there is a column “Hearing”, where the element “Flash of warnings” is located. You need to click on an element once to activate it, then the slider will move to the right and turn green.
- You can exit the Settings and check the result.
After these manipulations, the function will be activated and will be used to constantly be in touch. The only drawback in this technique is that for better light visibility, you need to put the smartphone on the table with the screen down, this can lead to scratches and other damage. Even in the back down position, the indicator light remains slightly visible.
Other flash options
We figured out how to turn on the flash when calling iPhone 6 and other models with iOS 7 and higher, but the function of the LED-LED is not limited to this. The most useful feature is the flashlight. It allows you to see the dark corners of the room or illuminate the road on the street to avoid injury. To activate the mode, just go to the "Control Center" section, which unfolds with a swipe from the bottom edge up. In the curtain that has dropped out, you can find the corresponding icon and the inscription “On. lamp".
The flash in flashlight mode will work continuously, and if you need to undo the actions performed, you can repeat the described manipulations. The developers have built in another option for deactivating the "Flashlight" mode. To deactivate the flashlight, you can unlock the screen and press the camera button with a long tap. After the procedure, the screen bounces a little, the function is turned off.
Using the LED in camera mode as a constant light allows you to make the picture better and more expected.
By activating the flash on a call, it is possible to significantly reduce the likelihood of missing a call, even if you have a hearing impairment or a considerable distance from your smartphone. You can notice the effect of the backlight even in the next room if there is insufficient lighting in the rooms.
If you still have questions on the topic "How to turn on the flash on the iPhone on a call?", You can ask them in the comment
A special light indicator that notifies the user about incoming calls and SMS messages on all iPhone phones missing. But each iPhone has an LED that is capable of performing this function - anyone can put a flash on a call. If you make the necessary settings, the phone that works “without sound” will start blinking at the moment of an incoming call or SMS.
LED flashing functions
This feature can be found in the Hearing accessible settings. It is called “LED”.
Purpose of the function
The included LED flash blinks brightly and pulsates when making a call. If necessary, you can set subtitles and adjust the audio volume for the connected headset. The glow function was created specifically for people with hearing problems, but it is often used by other users as well. Visual notification looks beautiful and effective, while not distracting from work and sports. This option also helps out when a person is in complete darkness or in a noisy environment. Some users set the alarm to light up.
How to turn on flash when calling iPhone for all models?
This function is supported by devices with the most latest versions iOS. Some users are thinking about how to turn on the flash when making a call on an iPhone. This can be done by adhering to the following algorithm of actions:
- First you need to open “Settings” on the home screen of your device.
- Here you should click on the button labeled “Basic”, and then go to “Universal Access”.
- Scrolling down the page, you can go to “Flash alerts” - on some smartphones it is referred to as “Flash in silent mode”.
- To activate the function, you need to rearrange the slider from the “Off” position. in "On".
The flash turned on in this way on the iPhone will blink three times during incoming calls and text messages. Also, the backlight will turn on when new messages and notifications appear in in social networks... If the indicator light does not turn on, the device should be rebooted to confirm the specified settings by pressing the “Power” button on the top panel of the smartphone.
Blinking will turn on only if the phone screen has been locked by the top off button and the device is put into sleep mode. You can see such a light alert if the smartphone is facing down. If the screen is lit, then for incoming calls, instead of pulsing the flashlight, a corresponding notification will be displayed. This is done to conserve battery power. The visual indicator can turn on at the same time as vibration and sound.
How to turn on flash when calling on iPhone for quiet mode?
The option to turn on light notifications in silent mode is available on iPhone devices with OS 9 version. Users want to know what needs to be done so that the flash blinks when a call is made, while the sound remains muted. By setting this value by default, the person will receive calls with flash only in silent mode.
This can be done using the same scheme, but in this case, you should additionally set the value "Backlight in silent mode". For owners of devices with iOS 10 version, this function is not available - they can turn on the flashlight on the iPhone or turn it off regardless of whether the silent mode is working on the phone or not.
If the “visual” notification is not working, it might be due to a technical issue. The contacts that power the LEDs may be damaged if dropped. You can check this by unlocking the hidden menu on the smartphone screen and clicking on the icon with the inscription “LED” to activate it. If the light is still off, the device is damaged. You can fix them at the service center.
How to turn off the flash on iPhone ringing?
For some people, blinking the flash on a call is annoying. You can again make the flash inactive when you call on an iPhone in a few steps:
- first you should open “Settings” and go to “General”;
- under “Universal Access” you need to find the column labeled “Hearing”;
- the slider next to the line “LED flash for warning” must be moved to the left, setting the mode to “Off”.
After that, the flashlight on the iPhone will not turn on automatically when new notifications appear.
To turn the LED on and off on iPhone phones, you do not need to download any applications or additional device. The function is present in the smartphone and is activated by default by pressing the corresponding button. The settings on iPhones 5, 5S, 6, 6S are set in the same way. On devices with OS 8 and later, the glow works only with the sound turned off.
Unlike other smartphones, the iPhone doesn't have a dedicated indicator for notifications. But the iPhone has a special feature for the deaf and hearing impaired, which uses an LED flash to show incoming notifications and calls. If you want the flash to flash when making calls and notifications, enable this function, and read how to do it below.
You can activate the flash on iPhone to notify you of incoming calls and messages. However, it will blink only if your smartphone is locked. And when the screen is active, there will be no blinking.
How to turn on flash when calling on iPhone
1. Go to Settings from the main screen of the device
2. Select an item The main
3. Select an item Universal access
4. Find the section Hearing and flip the toggle switch Flash alerts or
To turn off the flash, repeat the same process and slide the toggle switch to the OFF position.
How to turn on flash when calling on iPhone in silent mode
1. Go to Settings from the main screen of the device
2. Select an item The main
3. Select an item Universal access
4. Find the section Hearing and flip the toggle switch Flash alerts or Led flash for warnings
5. Move the toggle switch to the mode ON Near Flash in silent mode.
The flash will now flash on calls and incoming notifications, even when set to silent. It should be noted that initially this function was designed for users with disabilities, however, as you can see, it is quite popular among ordinary people.
Still have questions?
If you still have questions about how to turn on the flash when you call on the iPhone, ask them below in the comments.
Today I will tell you about some of the features of the flash mobile device iPhone. For the first time, the LED flash appeared in the 4th generation model - in the iPhone 4, in the previous models there was no built-in flash, but those who wished could purchase a separate flash accessory (called like iFlash) and, connecting to the 30-tipin connector, use it. Starting with the 4th iPhone, Apple began to equip all subsequent phone models with a flash, now the LED is located on the back of the phone, near the camera and its main task is to create sufficient lighting when taking photos and videos. In addition to the main task, the flash also performs other useful functions, which we will talk about today.
How to turn on the flashlight in iPhone
I will not tell you how to turn on the flash in the iPhone when taking photos, I think, by running standard application"" You will deal with this simple task. With the advent of iPhones, a flashlight appeared that works with a flash. Button " Flashlight"Is located in the" "widget. To be honest, I use this flashlight more often than flash when taking photos. You come home late, everyone is asleep, you take your iPhone out of your pocket, turn on the flashlight and wander around. Well, or if it's dark at the entrance, then it also helps out. It's easy to turn on the flashlight in the iPhone - I wake up the phone with the Home button and pull out the Control Center from below, in it I press the lower left button with the image of a flashlight.
IPhone's standard flashlight uses flash
The button is turned on and the flash starts working as a flashlight. In order to turn off the flashlight, you can repeat the same steps, but there is also a faster secret way to turn off the flashlight in the iPhone - after walking around the house with the flashlight on, the phone screen manages to lock (the screen lock time in my settings is 1 minute). To turn off the flashlight, I wake up the iPhone and press the trailing Camera button in the lower right corner. After pressing, the screen jumps a little and the flashlight turns off, this method is one step faster than turning off the button in the Control Center.
In newer iOS firmware, I turn off the flashlight in blocking mode like this - I press the Home button and pull the screen slightly to the left, if you pull it hard, the camera will turn on there.
Turn on the flash on the iPhone call
V iPhone settings there is another possibility of using the iPhone flash, the function is called - LED flashes for warning... By enabling this function, you will not only hear the incoming call, but also see it with the flashlight flashes, such is the indication. I think this feature was designed for people with hearing impairments. That is, if a person has poor hearing, then a flash on the iPhone's ringer will help to see an incoming call in a flickering phone. Many users without hearing problems also enable this function in their phones, this is done as follows:
Launch the standard "Settings" application and select the "General" section.
In the "General" select "Universal access" and turn on - LED flash for warnings. In new iOS versions the subsection is called - Alert flash.
If you figured out the flashes, then you can put your own melody on the incoming iPhone call.
You will now see the flashlight blinking on iPhone call, message or triggered. Warning flashes will only flash if the iPhone is in lock mode. When unlocked (not in hibernation), warning flashes do not work. Indication of a missed message is possible only if a missed SMS reminder is set.
