Firmware for Samsung Galaxy S3 mini. SAMSUNG GALAXY S3 MINI Firmware

Official firmware Android 4.1 [Stock ROM file] -
SAMSUNG Custom Firmware -

If a custom or official firmware on Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free help. With backup and manuals. Just do not forget to write and reviews your smartphone - it is extremely important. This page will also appear firmware on Samsung Galaxy S III Mini GT-I8190N 8GB. Note that this model Samsung requires an individual ROM file, so you should not try firmware files from other devices.

What are the Castom Firmware (Firmware)?

1. CM - Cyanogenmod.
2. Lineageos.
3. Paranoid Android
4. Omnirom
5. Temasek's.

1. AICP (Android Ice Cold Project)
2. RR (Resurrection Remix)
3. MK (Mokee)
4. Flymeos.
5. Bliss.
6. crdroid
7. Illusion Roms.
8. Pacman ROM.

Problems and disadvantages of the smartphone from Samsung and how to fix them?

• If the Galaxy S III MINI GT-i8190N does not turn on, for example, you see a white screen, hanging on a screensaver or only flashing alert indicator (perhaps after charging).
• If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
• Not charging (usually, problems with iron)
• Does not see the SIM card (SIM)
• Camera does not work (for greater extent, hardware problems)
• Sensor does not work (depends on the situation)

For all these issues, please contact (you just need to create a topic), the specialists will help free.

Hard Reset for Samsung Galaxy S III MINI GT-I8190N 8GB

Instructions, how to make Hard Reset on Samsung Galaxy S III Mini GT-i8190N 8GB (resetting settings). We recommend to get acquainted with the visual guide, which is called on Android. .

Codes for resetting settings (open the dialer and enter them).

1. *2767*3855#
2. *#*#7780#*#*
3. *#*#7378423#*#*

Hard Reset via Recovery

1. Turn off the device-\u003e Go to Recovery
2. "WIPE DATA / FACTORY RESET"
3. "Yes - Delete All User Data" -\u003e "Reboot System"

How to go to Recovery?

1. hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
2. the menu will appear with Android. Everything, you in Recovery!

Reset settings on Samsung Galaxy S III Mini GT-i8190N 8GB can be done in a completely simple way:

1. Settings-\u003e Recovery and Reset
2. Reset settings (at the bottom)

How to reset the graphic key

How to reset the graphic key if you forgot it, and now you cannot unlock your Samsung smartphone. On the Galaxy S III MINI GT-I8190N 8GB model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.

1. Reset graph. Locks -
2. Password reset -

Full and convenient SAMSUNG Galaxy S3 Mini Phone Firmware Guide on CyanogenMod 11 (from Maclaw Studio) C Android 4.4 Kitkat

Before starting the procedure, make sure that the smartphone is charged at least 50%! Those who already have a custom recovery can immediately move to section number 8.

Firmware process:

1. Create immediately on a disk with English letters or numbers folder for

such Files (Example: C: I8190)

2. Download everything you need to download the links provided below for the firmware.

Download Odin PC ODIN3_V3.09

Download Touch or Classic CWM Recovery in format.md5

or * (if using the first recovery installation will occur with an error)

Download twrp recovery.md5

Download the latest firmware CyanogenMod 11 from Maclaw Studio

Download SAMSUNG USB Driver For Mobile Phones V1.5.29.0 driver

Gapps from Maclaw (from the list Select any kit for Android 4.4.3)

3. Disable excess on PC:

If you have a KIES utility installed, then you have 2 ways:

Remove kies.

Go to Application Manager (Ctrl + Alt + Del) and complete all procedures where Kies is written.

If you have antivirus - you need to turn it off

4. Installing the programs necessary for the firmware:

Install SAMSUNG USB Driver For Mobile Phones V1.5.29.0.exe drivers

Unpack ODIN3_V3.09 (extract in odin3_v3.09)

5. Translate Galaxy S3 Mini to Download Mode:

Fully turn off the smartphone, it should go out everything.

At the same time clamp three buttons "Power + volume down + home"

A warning will appear. You must click "Volume Up"

There should be a "downloading" function with a green man in the center.

6. Installing Recovery (CWN) on Galaxy S3 Mini:

Run item 5!

Run Odin3 v3.09, it should be in your ODIN3_V3.09 folder

Click on the PDA field and locate the Recovery-Clockwork-Touch-6.0.2.7-Golden.tar.md5 or Recovery-Clockwork-6.0.2.7-golden.tar.md5, which you downloaded to the i8190 folder

Connect your smartphone with the original cable to the PC, the first field ID: COM lights up in blue.

If all previous sections are made and successfully, click "Start"

After graduation, the "Reset" and the smartphone will reboot

7. Copy the necessary files on Galaxy S3 Mini:

Turn on the smartphone

Connect the device to the PC in the disk mode

Copy the internal memory of the smartphone:

Firmware cm11.0_golden.maclaw.20127.zip.

Set of Google applications Gapps-Modular-full-4.4.2-20140123a-signed.zip

8. Installing the CyanogenMod 11 firmware on Galaxy S3 Mini:

Fully turn off your smartphone, everything should go out.

At the same time, clamp the three buttons "Power + volume up + home"

In the downloaded Recovery, do in order of wipes:

Wipe Cache Partion.

MOUNTS & STORAGE → FORMAT / SYSTEM

WIPE DATA / FACTORY RESET

Install Zip From Sdcard, find the archive with the firmware CM11.0_GOLDEN.MACLAW.20140127.Zip

Install Zip From Sdcard, find the archive of Gapps-Modular-full-4.4.2-20140123a-signed.zip

Restart your smartphone. If everything is done correctly, you will have an animation of CyanogenMod 11 download (from Maclaw Studio) and then the device itself will be loaded with a new firmware.

The official version of the SAMSUNG GALAXY S3 MINI firmware update was recently released - Android 4.2.2 Jelly Bean.

Preparation for the firmware

Before you start the update, read the rules for preparing the process.

1. Use this version directly for the Samsung Galaxy S3 mini, and do not risk installing this software to other smartphones models;
2. Make sure that the drivers are saved on the computer;
3. Turn on USB mode;
4. The phone should be charged at least 70%;
5. Before starting the smartphone firmware, make sure that all contact details and the necessary information from the device is copied.

Required applications - ODIN version 3.09 and boot file.

Instruction

1. If the boot file is archived, remove the contents. The archive must have files with the necessary extension (tar or tar.md5).
2. Turn off the phone.
3. Go to Download Mode mode. To do this, you need to hold the "loudness quieter" and "home" buttons, then click the "Power" button. The Android logo icon should appear on the screen, then click "Power"
4. Run the ODIN application on your computer.
5. Connect the machine via USB cable to a computer. When connected in the ODIN application, the ADDED! "Window should appear if the window does not appear, try to connect to the computer again. If when you re-connect to a computer, the message has not appeared, we recommend reinstalling the driver
6. Select the desired firmware files.

7. Make sure that the AUTO Reboot and F. Reset Time items are selected in the ODIN application, as shown in the figure.

8. Click "Start" and expect until the program itself will do everything you need

9. After the installation is completed, the smartphone must overload itself. After the Pass message in the ODIN application window, you can disable the phone from the USB.

And it's all! Some program errors are fixed in the updated firmware, and the software works a little faster, the performance of the device has increased.

We want to warn that for any changes in the phone you yourself are responsible!