Meizu 3s 4pda firmware. How to flash Meizu M3S and M3S MINI - detailed instructions

19.04.2021

Audio

If you are the owner of the Chinese smartphone, sooner or later the moment comes when the device will stop receiving the update of the system "by air". This is a signal that it's time to take things into your hands and do everything yourself. For Meizu M3s, the firmware is needed if the smartphone has dropped performance, "glitches" appeared, that is, in general, all the work of the gadget worsened. The new firmware helps stabilize the system and return it "into battle." Again, you have to do this manually if the developer stopped supplying update files. There are two possible options: directly through a mobile device or using PC.

To understand how to update Meizu M3S without third-party equipment, even an inexperienced user will be able to explore detailed instructions and clearly follow them.

Download firmware from the official site

In order for the smartphone to be updated, you need to download the update for M3S. You can do this on the official website of the developers. On the Internet there are many different third-party sites with firmware files, but it is not recommended to use them, as this may entail a full failure of phone functions.

So, to download the official firmware version, go to the manufacturer's resource and select the name of the desired model in the update list. For the jump it is quite suitable for a standard device browser.

After the file is completed, it is required to check the correctness of the name and expansion. Search the downloaded firmware is needed in the folder " Download" or " Browser.»Using the built-in" Explorer" Update must be called " update.zip."And stay in the archive. In no case can not be extracted from the archive. This will damage the downloaded firmware.

If the name and extension are correct, you can move the firmware file into the internal memory of the device so that the system can detect it in the developer mode.

Start your smartphone in Recovery Mode

Now it remains to serve the smartphone signal to start flashing. To do this, turn off the gadget, and during the inclusion, open the menu " Recovery Mode.»Using the simultaneous clamp of the power key and increase the volume. The following follows two simple steps:

System Upgrade.»;
Clear Data.

That's all. The process of flashing is running, it remains only to wait for a while.

To stabilize the work of the smartphone after installing updates, it is recommended to make a complete reboot. That is, when the process of flashing and the phone will turn on the desktop, you should immediately restart it.

For Meza, the update can serve good service and return former performance and functionality.

Using a computer

If for any reason it is not possible to download the update from the Internet straight to the mobile device, there is a second way - to use for flashing PCs.

It is worth noting that no one gives a manual updating of the warranty system. That is, turning all actions to the user will have to do with their own risk. Please note that for the firmware of the smartphone through the computer, the following is:

Mobile device itself;
USB cable for pc and smartphone connection. It is recommended to use only the original cord;

Download firmware

Just as in the first option, first you need to download the firmware for MAZ M3C from the official resource. You should choose only the firmware option that is suitable for your smartphone model. If you mistakenly download the wrong file, the device will turn into "brick" after the update. Therefore, doing everything is necessary very carefully. By the way, using a manual flashing option is required only when the manufacturers have stopped offering an automatic update of the device from the "cloud". In any other situations, it is better to give preference to an automated firmware update system. We save the firmware to the root on the memory card (Micro SD) and insert it into the phone.

Check the file name and expansion

This follows the name and expansion of the file again. He must be called update.zip."And nothing else, and should be strictly in the archive.

Phone Connecting in Recovery Mode

The next step is to enter the developers menu. The higher was described how it is done on the MEZ phones (the power and volume buttons are clamped after shutdown).

In the list that appears, select the item " System Upgrade.»;
From the proposed options to choose " Clear Data." If there were any important data on the device, then before starting this process, you must make a backup copy or move them to a memory card, otherwise they will be lost.

Firmware

It remains only to wait for the completion of the flashing process and you can enjoy the work of an updated smartphone.

Meizu M3S 16GB. Works under the operating system Android 5.1.. Its productivity is estimated at 3 out of 5 (in its segment). This smartphone is quite productive. Here are the characteristics of the device, instructions, how to make a reset settings, flash the device and, of course, how to get root rights to MEZ

Root on Meizu M3S 16GB

How to get a root for Meizu M3S 16GB See the instructions below.

Initially, try universal utilities for getting root on MTK for M3S 16GB model

(root in one click)
(Collection of root-utilities in one)

If it did not work and SuperUser did not appear, then ask to help in a special topic

Characteristics

Type: Smartphone
Operating system: Android 5.1
Case type: Classic
Case Material: Metal Control: Mechanical buttons
SIM Type: Nano SIM
Number of SIM-Cards: 2
Mode of operation of several SIM cards: alternated
Weight: 138 g
Sizes (shXVXT): 69.9x141.9x8.3 mm
Screen Type: Color, Touch
Touch Screen Type: Multitach, Capacitive
Diagonal: 5 inches.
Image Size: 1280x720
The number of pixels per inch (PPI): 294
Automatic turn of Nacrane: yes
Scratch-resistant glass: yes
Camera: 13 million pixes., LED flash
Camera functions: NOTOFOKUS
Diaphragm: F / 2.2
Video recording: yes
Max. Video Resolution: 1920x1080
Max. NCAD video frequency: 30 frames / s
Front camera: yes, 5 million pixes.
Audio: MP3
Headphone jack: 3.5 mm
Standard: GSM 900/1800/1900, 3G, 4G LTE, Volte
Interfaces: Wi-Fi 802.11n, Bluetooth 4.0, USB
Satellite Nunalogue: GPS / GLONASS
A-GPS System: yes
Processor: MediaTek MT6750, 1500 MHz
Number of processor nuclei: N8
Video processor: Mali-T860 MP2
The volume of the built-in memory: 16 GB
RAM size: 2 GB
Memory card slot: yes, up to 128 GB (combined with a slot for the second SIM card)
Accumulator capacity: 3020 mA / h
Battery: non-removable
Charging Connector Type: Micro-USB
Loud connection (built-in speaker): yes Management: voice recruitment, voice control
Flight Mode: Yes
A2DP profile: yes
Sensors: Notevice, Approximation, Compass, Fingerprint Read
Flashlight: Yes
USB-Host: yes
Use in the USB drive: yes
Features: Processor: Arm Cortex-A53 1.5 GHz x4 + Arm Cortex-A53 1.0 GHz x4; NEOCHROID 5.X, FLYME
Date Announcement: 2016-06-13

Firmware for Meizu M3S 16GB

Official firmware Android 5.1 [Stock ROM file] -
MEIZU Custom Firmware -

Firmware for Meizu M3S 16GB You can find in a branch In addition, you first download the necessary software for flashing

What information do you need to know for flashing?

Brand / Model [Desirable] - Meizu / M3S 16GB
Processor - MediaTek MT6750, 1500 MHz
LCD DRIVER (version)
Kernel (version) [Preferably]

Before flashing and in the process of selecting the firmware, specify the basic TX (Specifications) through the program

What are the Castom Firmware (Firmware)?

CM - Cyanogenmod.
Lineageos.
Paranoid Android
Omnirom
Temasek's.

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (Mokee)
Flymeos.
Bliss.
crdroid
Illusion Roms.
Pacman ROM.

Problems and disadvantages of a smartphone from Meizu and how to fix them?

If the M3S does not turn on, for example, you see a white screen, hanging on a screensaver or only flashing alert indicator (perhaps after charging).
If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
Not charging (usually, problems with iron)
Does not see the SIM card (SIM)
Camera does not work (for greater extent, hardware problems)
Sensor does not work (depends on the situation)

For all these issues, please contact (you just need to create a topic), the specialists will help free.

Hard Reset for Meizu M3S 16GB

Instructions, how to make a Hard Reset on Meizu M3S 16GB (Reset Settings). We recommend to get acquainted with the visual guide, which is called on Android. .

Codes for resetting settings (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off the device-\u003e Go to Recovery
"WIPE DATA / FACTORY RESET"
"Yes - Delete All User Data" -\u003e "Reboot System"

How to go to Recovery?

hold and hold the Vol (-) [volume down], or VOL (+) [Volume Up] and the power button (POWER)
the menu will appear with Android. Everything, you in Recovery!

Reset settings on Meizu M3S 16GB can be done in a completely simple way:

Settings-\u003e Recovery and Reset
Reset settings (at the bottom)

How to reset the graphic key

How to reset the graphic key if you forgot it, and now you cannot unlock your MEIZU smartphone. On the M3S 16GB model, the key or PIN code can be removed in several ways. You can remove the lock and via resetting the settings, the blocking code will be deleted and disabled.

Reset graph. Locks -
Password reset -

M3S firmware on global. Also in the attached file, the letter will receive a link to download via torrent, for which you can download the program for firmware M M3 16G s. D3 Link to 4 firmware 6 took here 3 216 and. M M5 Official 4PDA firmware. A noticeable increase in time autonomous work, so I advise everyone to put it. We make a smartphone international, shift on. Link to the topic 4 AAC, MP3, OGG, WMA. Open R rights for this manual M M3 N. Firmware for the international version of the MEIZU M3 Mini smartphone. About the forum 4pda already said the discussion M M3 M is so hard for something. Tags # 3 firmware # 3 firmware # 3 global firmware # 3 firmware 4 # 3 #. Q version Box with hieroglyphs, all stickers in Chinese, charging Chinese, firmware A, if the product itself has not changed, recovery on. We will try to flash the phone MAZ M2 laptop. Firmware M3 with F T T Vadovnovozhan! Meizu M3S. Buy Mason M3S Mini from Verified Ali Seller Buy Mason M3S Mini in Russia. AAC, MP3, WAV, WMA. Meizu M3 M Published

Firmware M M3 M 4V R. M M3S Official firmware OS 5. Software M M3. I was already half a mee and root, all forums read, well, I did not find anything. M M5 16GB 97, 45 Overview of firmware M M3 Overview. Firmware M M5 4K K. Reference on the topic 4 Location on the folder M 3 The command for the terminal firmware M M3S on the global version of the changer ID. Rostislav, error due to the fact that the servers associated with global firmware move to Europe, they turned off, this. Firmware on Flyme 5. M3 This is the only current metallic currently. Link to the topic 4 Location on the folder M 3 m3c MEZ Firmware 4. It is possible that when the firmware with the number 5. Mate MX5 firmware 4. Firmware M3 with. Link to topic 4 Location on folder M 3. MEZ M3 Firmware 4. Firmware M M3 M 4 Link to topic 4 Location on folder M 3 Team for terminal

Index A means that this firmware is designed for devices sold in the Chinese market, index G. Reference to the topic 4 on the folder M 3 for the terminal. Wait until the end of the firmware update process will restart automatically. In order to download something to 4. To download, select the firmware you need and click on the link. Dear users, here you can download Software, Drivers and Instructions. Thanks to the 4pda forum, we have a fully working script for this operation, you can download it in the topic M M2 w3bsit3-dns firmware. About m3 is not aware, but about M2 they write that through the computer you need. Firmware M M3S on the global version of changing ID. Method of firmware Chinese M M3 on International version F. When will the new firmware and the update for M M3? PDA A A firmware M. Update and firmware Update phones M M M3S. In order to download to 4, you need to be registered. I have a smartphone with a Chinese firmware, can I immediately install this firmware from M3 on it? ATRAC3, MP3, WMA. On the firmware from the M3 smartphone saves a charge of much more. The camera does not shoot and focuses on M M2, what to do. Mase M5 4 firmware

Itckz Flashtula firmware in 4. M 3 4 Firmware What will happen to Rubles in 2017 by expert opinion 2 hours ago. It is necessary to warn that if you inking decided to update Android and reflash M M3, then you act on your own risk. Ask a question about a! F. Many thanks to the guys from the website of 4pda. Link to the topic 4 Location on the folder M 3 command for the terminal. Downloading the firmware for M M3S is available via torrent with instructions. Official firmware for M M3. Good day The last few days MEZ M3S ceased to work. MAZ M3 firmware 4 firmware M M3S. M M3 is a budget smartphone, but it can be confused with the phone. In any case, on 4pad more information than here. 3G with poison, and with M M M3 Official firmware Post #. G M M3 & M3 U A D H.

Owners of smartphones released by popular in our country by MEIZU manufacturer, puzzled by the possibility of flashing their devices quite often. This is due to the features of the Flymeos branded android-envelope, which is managed by the company's devices, as well as a variety of types and versions of this OS. In the material proposed below, it is described how to reinstall the operating system on the MEIZU M3 Mini model.

As a result of the implementation of the following instructions, the MAZ Mini MAZ MAZ can get the latest version of the OS on the smartphone, ensure the full compliance of the program part of the device needs and expectations of users from the Russian-speaking region. In addition, the article affects the recovery issues in the software plan of the devices. For any purpose of the firmware before switching to direct interference to the work of the device, consider:

All operations with the model described in the present material are made by the user at its own discretion and, taking into account the risks arising in the process of working with the system on the apparatus! Responsibility for possible damage to the phone is entirely on the face producing manipulation!

A certain list of operations made before the MEIZU M3 mini firmware allows you to quickly hold an android reinstall, the ability to save data from the phone and their recovery subsequently. It is extremely recommended to familiarize yourself with the instructions for the implementation of each preparatory and firmware operation from the beginning to the end and only after that move to their execution.

Types of firmware

Meizu, depending on the region, for which a specific apparatus is intended, equips its smartphones by the Flymeos system of different types. You can distinguish the firmware by finding out the letter index present in the designation of the assembly number.

In the smartphones of the MEIZU M3 Mini model, the system with indexes can be installed on official methods: "Y" (Yunos - OS OS, is practically not used); "A" (universal, for international market); "UY", «QY», "My" (Specific solutions "sharpened" under mobile operators from China).

Probably the most sad news for the owners of the device under consideration will be the fact that the official "global" firmware (indicated by the index "G") It does not exist for the smartphone, and the above android-shell types are not initially equipped with interface translation into Russian. In addition, in the most suitable for installation in the model official systems from Meizu with an index "A" There are no Google services and they are replete with Chinese modules, absolutely useless and superfluous for users from our country.

In other words, in order to ensure the maximum compliance of the Masse M3 programmatic part of the M3 Mini needs of the user from the Russian-language region, the official firmware will have to modify. You can also resort to installing informal solutions already prepared for the device with enthusiast users and laid out on the global network.

How to upgrade the system software in M3 mini by various methods is described below in the article, but initially should be installed in the official smartphone Flymeos 6.3.0.2a - The last at the time of creation of this material is the version of the system for the apparatus under consideration. It is on the specified assembly of Filamos that operated the device used for the experiments described below. Link to download a package with the specified assembly for installation can be found in the description "Fashion 1" Model firmware below in the article.

Drivers and operating modes

In general, (when the smartphone software part works normally) When reinstalling the system on the model under consideration, the conjugation with the computer will be required only to copy packages from the device to the device's memory. But in a situation where the device is not loaded in Android, requires restoration of system software, etc. Without a PC with installed specialized drivers can not do.

Consider the procedure for equipping the computer by all components, the need for which may occur when working with M3 mini operation, and at the same time we learn how to switch the device into special start-up modes to access system memory sections. Archives with drivers for the model load on the link below, unpack it into a separate folder on the PC disk.

Before further actions, you need to deactivate the verification of digital signatures of the drivers in Windows!

On the computer run "Device Manager" And we carry out the following options for connecting the device in different states to the PC.

MTP mode (File Transfer).
Recovery Wednesday (Recovery) - This is the state of the phone most frequently used when installing firmware on Meizu.
Debug Bridge (Android Debug Bridge). In some situations, it may be necessary to access the M3 mini system sections from the computer, which also requires drivers. To ensure the interaction of PC and smartphone via ADB:
Masse M3 Mini Machine built on the basis of the MTK processor, which means that at the lowest level with the memory of the device in critical situations it is possible to interact through the port . To access the port, connect the shutdown smartphone to the computer, after pressing and holding the button on the device "Volume -". As soon as the cable is connected, release the volume control button.

The driver installation procedure for the mode fully complies with the instructions available on our website on the following link. The name of the file used is "CDC-ACM.INF".
Go to B. "SETTINGS"("Settings") and open options "Security" ("Safety") From section "Device" ("Device"). Tepame "ROOT PERMISSION" ("Root access").
"Accept" Under the warning about the potential danger of opening root-privileges and tapa Ok. Then we enter a password from the Flyme account and confirm the request by pressing "OK" again.

As a result, the smartphone will reboot and will be launched with activated root rights.
Next, install the SuperSU root right manager. Tool Available in App Application "App Store"integrated into all FLAYM assemblies. Open the Mesis Appstor and find the SuperSU tool page by keeping the appropriate query in the search field.
Tepame "Install" ("Install"), Then wait for the download of download and the installation of Cupurs.
After the installation of the Superst will be over, go along the way "SETTINGS" ("Settings") — "Security" ("Safety") — "ROOT PERMISSION" ("Root access"). We find item "SuperSU", tadam on it and install in the query that appears. The mark near the option "Allow" ("Allow"). In the next window click "Allow" Once again and, finally, confirm reading the warning - "Still Allow".
Restart M3 mini. Then open the privilege manager and update the binary file if necessary.

The corresponding request may appear after the first start of the fund.
The second opportunity to get a superuser privileges on Meizu M3 Mini is the use of King Root tool. Recommendations for the use of the fund are set forth in the material on the reference below, but it is necessary to consider that the tool is successfully functioning not on all versions of Flymeos versions in question.

Backup information

Before interfering with the system of system on any android apparatus, you simply need to create a backup copy of the information device in any preferred method.

With regard to the preservation of M3 mini mini data, the best solution will be the use of the options built into the Android-envelope. The process of creating a backup tools by Flymeos step by step is carried out in this way:

Firmware

After the preparation of the device and the computer, you can switch to the choice of the method of installing the operating system. Having preferred one or another method of manipulations, it should be guided primarily in the state of the M3 mini program part, and then the desired result, that is, the type / version of the system, which will operate the device in the future.

Method 1: Recovery

The instructions offered below are actually the official Flymeos Installation Guide to Meizu devices. The method is characterized by its simplicity and can be used to install any versions of official firmware, as well as a complete reinstallation of the system assembly, which the device is currently running. If the M3 mini is loaded in Android, it is not required to perform a computer to perform manipulations, except for copying a package with the system into the internal memory of the smartphone.

As an example and persistent recommendation for users conducting manipulation with M3 mini for the first time, independence from the installed android assembly, install the official Flyme 6.3.0.2A.. Package with this version of the OS can be downloaded by reference:

Load a zip file with firmware and without renaming (the name must be "Update.zip"), We put it in the root of the internal drive of the device. If Flymeos is not loaded, go to the next step without copying the package.
Fully charge the smartphone battery, turn it off and go to the recovery environment.

In case the firmware was not placed in the device's memory earlier, connect it to the PC and copy the package "Update.zip" on the drive "Recovery"Identified in Windows as a result of pairing the device with a running recovery and computer.
Set a check in Chekbox "Clear Data" To clean the memory of the device during the installation process of the system. You can skip this step only when updating is fully updated and without failures of the Flymeos functioning, but also in this case, the procedure is recommended for use.
To initiate the beginning of the process of overwriting system regions of M3 mini memory, click "Start". Further manipulations are made automatically, no action is needed. We observe the fill in the procedure execution indicator.
Upon completion of the installation of Flymeos Meizu M3 mini, it will automatically restart, will optimize applications and starts to the installed system - demonstrates the screen of the initial shell setup screen.
Install Android settings,

after that, the phone is considered ready for operation.

Installing Google Services

As mentioned above, in official Flymeos assemblies there are no Google services and applications. To correct the situation and get familiar features, for example, Play Market on your M3 mini, we use the instructions from the material available on the following link:

Rusification of the official OS.

Of course, the interface of the system shell in English is not exactly what makes the operation of the smartphone as comfortable as possible for the Russian-speaking user. Those who do not plan to switch to modified firmware can rectify the situation in two ways.

For the effective work of the "interface translators" below, root rights are required!

Android application MORELOCALE 2 provides the simplest opportunity to add Russian to Flymos. The full translation of the operating system of the diesel 2 does not provide, but the elements of the interface of most applications will be in Russian.
The more broadest opportunities for transferring official Flymeos at Meisse M3 Mini provides development called «@Florus». This product is recognized as one of the best in solving the Russification of the system on Meizu and is distributed free of charge on profile forums. Download APK-file program, tested on a MH model operating running Flyme 6.3.0.2A., You can link:
- Download "Florus-8.4-Flyme6.apk" And put the file into the internal memory of the device.
- Install means. To do this, open the application "Files" And we find the above package in the device's memory.
  
  After the tap on the file, a request will be prompted to unlock the capabilities of installing applications - click "Unblock". Next step - Pressing the button "Sontinue".
- Opening an installed Florus. Tepame "Install Russian Localization" and provide a superuser privilege tool.
  
  Waiting for the completion of the Russification process - Displays the requirements of the phone reboot, under which you need to tap "YES".
- After the device restarts, you can state almost complete translation of the Flymos interface
  
  and installed applications into Russian.
- Additionally. If you wish, using a flusure, you can remove unnecessary Chinese software, in abundance present in the official firmware. To do this, click on the main screen tools the appropriate button, and then wait a bit until the system is cleaned.
  
  After rebooting, almost all useless applications will disappear from the phone.

Method 2: ADB

The device has just become the owner of Meizu M3 Mini in hand, the device may be installed on which the OS has been installed, which has been previously different changes. For example, there are cases of cases where sellers with Aliexpress randomly or deliberately rubbed the section "Recovery"making it impossible to launch the recovery environment, and / or deleted software modules responsible for updating OS, etc.

In such a situation, it is necessary to return the recovery environment to the device, which will further use the above-described method of installing android. You can flash the recovery by sending the team to the phone via Android Debug Bridge (ADB). It is worth noting that except "Recovery" ADB commands allow you to overwrite other sections of the device's memory, that is, flashing Meizu M3 mini is actually completely completely, but more rational still will install only the recovery environment, and further manipulation with systemic software is already through it.

To perform recapinition of memory partitions using ADB commands, root rights must be obtained on the machine and the SuperSU is installed!

The following link is available on the download archive containing everything you need to execute further instructions: the minimum set of ADB and FastBoot files to work with android devices; img-image "Recovery" From the firmware 6.3.0.2A..

Unpack the archive obtained by reference above. As a result, we get two catalogs: "Adb_fastboot" and "M3_RECOVERY". The first folder contains an adbus console utility, - it copies it to the root of the system disk (with :) computer.

The second directory contains an image of the recovery environment. Folder with an img-file without renaming, you need to put in the root of the internal memory of the smartphone.
Run the windows command line.

We enter the command to the console to go to the catalog with ADB and click "ENTER" on keyboard:
cD C: \\ ADB_FASTBOOT

Activate on m3 mini "USB debugging" And we connect the smartphone to the USB PC connector. In the console, write a device for checking the visibility of the device by computer:

As a result, the command line must display the serial number of the device.
Next, in turn, send the following syntax to the phone. After entering each instruction, click "ENTER" on keyboard:
- aDB Shell.
- dd if \u003d / sdcard / m3_recovery / recovery.img of \u003d / dev / block / platform / mtk-msdc.0 / by-name / recovery bs \u003d 40960
- rM -R / SDCard / M3_Recovery / *
- aDB Reboot Recovery.
As a result of the fulfillment of the above steps, Meox M3 mini will reboot into the factory recovery, which makes it possible to install Flyme OS "Fashion 1"described above in the article.

Method 3: Flash Tool

The most cardinal and effective method of working with Memory regions MEIZU M3 MINI is the use of the functions of the SP Flash Tool - a universal Android-smartphone firmware built on the basis of MediaTek processors. The following method allows you to return the device to life even if it is impossible to download in the OS and the lack of access to the recovery.

The algorithm of actions carried out through the flash station and allow you to flash the model in question, differs from the standard procedure suitable for the restoration of the majority of other MTK phones on Android. Therefore, we carry out the recommendations carefully!

As a result of the implementation of the following steps, four areas of the model under consideration will be overwritten - "Boot", "Recovery", "SYSTEM", "CUSTOM"In most cases, it allows the device to start in android and operate in the future normal. The System.img image from the example below contains a modified assembly of Flymos 6.3.0.0 with a Russian-speaking interface and refined from Chinese programs. It is through the FlashTool that the author of this modification recommends installing its solution.

Load the archive with a version of the version suitable for manipulations with Mason M3 Mini (when using other versions of the application, the following method may not work), and unpack the PC received into a separate folder.
Download a package with system images and scatter file. Remove the components in a separate directory.
Run FlashTool on behalf of the administrator.

Click "OK" In the notification that the scatter file appears.
Press the button "DOWNLOAD AGENT"that will open the file selection window in which you want to specify the module "DA_PL.BIN" and click "Open".

"MT6750_Android_scatter.txt"

"Open"

We are convinced that the Flashtool window corresponds to the screenshot below. That is, checkboxes in checkboxes must be installed. "Boot", "Recovery", "SYSTEM", "CUSTOM" And no others, as well as correctly indicate the paths to img images on the disk and the mode is selected. "DOWNLOAD ONLY".
To initiate a procedure for overwriting system sections of the device by clicking "DOWNLOAD".
The firmware will start automatically as soon as M3 mini is defined in Windows as "MediaTek Preloader USB VCOM". It remains to wait for the execution of overwriting areas of the device's memory, watching the fill in the progress bar in the Flash Tool program.
Upon completion of the operation, a confirmation of its successful result of the window will appear. "Download OK". Disconnect the YUSB cable from the device.
It is extremely recommended after performing the overwriting of partitions through the flash drive to clean the memory. Loading into the recovery, note the option "Clear Data"Tapam. "Start".
At the end of a fairly long stage first after the above-described boot manipulations and initialization of the installed components, a screen with a choice of Flyme language appears. Determine the basic parameters of the android shell.
You can go to the operation of the recovered smartphone running the modified assembly of Flymos!

Method 4: FlashFire (without a computer)

Modern software tools allow you to reinstall OS on Meizu M3 mini directly from Flyme, without cycling the PC and not translating the smartphone into special modes of operation. Most often, the following method that suggests the use of the functions of the Android application FlashFire is used to install modified and / or ported firmware into the apparatus.

As an example, set the port of the system from another smartphone in the model in question - Meizu M3S. This device is produced with global versions of firmware, so modernized for use on M3 Mini Fleimos from it is very popular among the owners of the model being styled. In fact, after installing the port M3 mini "turns" in M3S for system software.

Before performing the following points of the Instructions, you must receive on the device's privileges of the superuser and install SuperSU!

We place the directory downloaded by the link above and containing the image.img image, in the internal memory of the device or the memory card installed in it.
Install the FlashFire application from Google Play Market.

In the absence of Google services in the installed system, you can use the utility "Meizu App Store".

Open this store, write in the search field. "FlashFire"Tapam. "Install" On the program page and wait for the installation.
Open FlashFire, we provide a root-privilege tool.

I confirm reading the prevention of potential risks of the use of funds, tapping "Agree" Under the relevant request.
As before any procedure related to the intervention in the system on the android device, before performing further manipulations, it is recommended to create a backup of the already installed OS. The most reasonable solution for saving a backup will be the use of an external drive, so install the microSD card to the device, and then go to the following way:
- Click a round button «+» On the main screen Flashfire, choose "Backup" In the displayed list of options. Next Tapama "FULL ALL Partitions".
- Concerning "Location" And specify "EXTERNAL SD CARD" As a repository of a future backup. Optionally, you can assign a memorandial name backup and remove the checkboxes that indicate the data types that are not necessary to archive (most often from the backup exclude the largest partition "DATA"). By defining the parameters of the future backup, taping the checkbox at the top of the screen on the right.
- Press "Flash" At the bottom of the main screen Flashfire, confirm the request for readiness for the beginning of the operation by clicking "OK" In the window that appears.
- Expect the end of copying information to the archive - the smartphone screen will first turn off for a while, and then the inscription will appear on it. Next, information about the actions produced at the moment will appear.
- Upon completion of the creation of dump of sections, M3 mini will reboot, and we will receive a backup copy of the OS, which is stored along the path of FlashFire / Backups on the memory card.
Go to the download procedure in the FlashFire file image to overwrite the partition "SYSTEM".
Include in the process of reinstalling the firmware procedure for cleaning partitions in order to avoid problems in the functioning of Flymos in the future. Concerning «+» , choose "WIPE", set the checks in checkboxes: "SYSTEM DATA", "3RD Party Apps", "Dalvik Cache", "CACHE PARTITION". Confirm your choice tape on the tick at the top of the screen.
Press "Flash", I confirm the request for readiness for the beginning of the rewriting of the main system section, Tapping "OK" In the query window.
Next, the device will stop responding to user actions and the procedure for transferring files from the image to M3 mini memory, followed by filling out the progress indicator on the screen. Waiting for the completion of the process, after which the device will restart automatically.
The first launch of the system installed through FlashFire lasts longer than usual, due to the need to initialize and optimize all OS components. It is completed by the appearance of the original android screen appearance.
Determine the basic settings of the shell.
As a result, we obtain the daily operation of the M3 MINI operation, which operates under the control of the global firmware, intended initially for the M3S model, which, however, does not interfere with the system perfectly perform its functions!

Thus, by reading the above material, you can make sure that reinstalling and restoring the operating system of the MEIZU M3 M3 smartphone operating system is quite realized by the usual user of the model and with a scrupulous execution of proven instructions should not cause difficulties.