How to remove protective glass from iPad. How to remove the protective glass from the phone screen? Removing the old broken protective glass

25.05.2023

OS+Activators

Protective glass is an accessory that protects the screen of your smartphone from damage when dropped or hit. It is often used to protect the screen on touchscreen phones.

If the protective glass is broken, then it must be replaced in order not to complicate the work with the smartphone.

How to remove protective glass at home

You can replace the protective glass yourself, without resorting to the help of craftsmen in specialized repair centers. The main thing to remember about simple rules when working:

no need to rush, act as carefully as possible;
when removing the glass, try to hook it on one of the corners to lift it up. It will be easier, of course, to do this if the glass is not badly broken and relatively intact;
all manipulations must be carried out in special gloves that do not leave fingerprints on the smartphone screen.

How to remove the protective glass from the screen

To hook the glass, use a plastic card or a small piece of cardboard. You can try to pry off the edge of the glass with your fingernail or any flat object, such as a bank card. Another option is to use a special key to remove the SIM card slot, which the manufacturer puts in every box with a smartphone, to remove the screen.

After the edge of the glass is pry, you need to carefully separate the protective coating from the screen, going even deeper.

If the glass is badly cracked, then you should find the corner where the least damage is. It is necessary to start from this place, and clean off the cracked particles as the screen space is freed from glass.

If the glass is slightly damaged, you can use a silicone suction cup to remove it. The main thing is not to overdo it, so as not to break the glass along with the standard screen.

The main goal is to separate the protective glass and the standard screen, which are held together by the acting electrostatic forces. These forces act better than any adhesive mass. In this case, the model of the device does not matter, when removing the glass for all phones, the same algorithm of actions is used.

Safety glass manufacturers

Among the manufacturers of protective glass, Deppa is the most popular company. In the line of the company there are accessories for protecting devices:

Deppa - Barely visible glass compatible with 3D Touch;
Deppa 3D - compatible with the 3D Touch function and covered with a film that repels grease from the screen. Thanks to this coating, fingerprints do not remain on the glass.

Red Line offers the thinnest safety glass available on the world market. In addition to the oleophobic film, Red Line Tempered Glass is coated with a water repellent.

uBear has created a Nano Full Cover Premium Glass tempered coating similar in thickness to the previous version. Tech Amor's Ballistic Glass is made from several layers of Japanese glass.

Safety Glass Suppliers

Among the manufacturers, there are also several companies:

ICHECKEY GROUP is a Chinese manufacturer, one of the leaders in the world market;
Mofi is a company that focuses only on the production of protective glasses and cases for mobile phones of various models for many markets;
Benks is a brand that has received a national license for the production of protective glass, its products have passed the MFI certification from Apple;
CHYI Glass is the largest manufacturer of special purpose safety glass;
Geemo is the youngest representative of this list, whose production is based on the use of active polymer substances and special spray coatings. On the market since 2010.

Read our other articles:

We remove the old broken protective glass in a couple of minutes.

And those who don't know what it is can watch my video: https://youtu.be/xV8qQth30zo

At the end of the video, I talk about it in general terms.

The main function of the protective glass is to protect the phone from impact, cracks and scratches. This element takes care of everything. Over time, it becomes unusable, because it loses its attractive appearance. Because of this, the level of protection of the device is reduced. To replace it, you must first learn how to remove the protective glass from the iPhone. This procedure is not difficult. It is enough to follow simple rules.

Before you learn how to remove the protective glass from the iPhone 6 and 5, you need to familiarize yourself with the reasons for the replacement:

The appearance of the phone is spoiled.
The protective functions of the device are lost.
If you want to change to a new glass.

When the phone has a new protective glass, the device looks neat. There are special accessories for the iPhone that fit perfectly in size. But you can also use universal ones that need to be glued correctly.

You need to take into account one important nuance before removing the protective glass from the "iPhone 5" or 6. Since the screen surface is perfectly smooth, the glass is fixed on it securely. It is held not only by glue, but also by electrostatic forces. The two surfaces are firmly in contact, and therefore the glass will not be removed so easily. It must be pryed off with a fingernail. If you use another object for these purposes, for example, a knife, then there is a possibility of damage to the display.

One silicone suction cup will not help here either. If firmly stuck to the damaged surface, there will be no vacuum under it, it rebounds with force. When the grip is good, the suction cup does not come off, but another difficulty will appear.

The sensor is attached to the body with double-sided tape or glue. Their strength is less compared to the touchscreen and protective glass. If you apply force, you can rip off the entire screen module, which will damage its cables. Therefore, actions must be deliberate. Only then can you use the instructions on how to remove the protective glass from the iPhone 5s or another type of device.

The work must be done carefully. Before removing the protective glass from the iPhone, you need to prepare everything for the procedure:

Mediator.
Silicone suction cup.
Lint-free napkin.
Wiper.
Medical gloves.

Some glass kits include everything you need to complete the procedure. If these details are present, then the work is carried out easily.

How to remove the protective glass from the iPhone so that everything works out neatly. Before the procedure, wash your hands with soap and dry. You can use rubber gloves. This is necessary to protect against the occurrence of fingerprints and streaks. The screen will look neat.

On the damaged glass, you need to find a whole corner where there are no chips or other damage. In it, you need to cling to the suction cup, pressing it against the device. The corner with the suction cup must be pryed off with the help of a mediator, a spatula, so that the glass peels off. To do this, pull the suction cup in your direction.

The procedure must be performed carefully so that the screen is not torn off before a gap is formed. In the absence of a suction cup, you can smoothly insert the mediator into the gap that appears. When peeling, it is necessary to deepen the mediator. With a large screen, two tools need to be used. At the end, you need to lift the suction cup towards you in order to completely remove the glass.

When the user knows how to remove the protective glass from the iPhone, you can safely perform the procedure. Then, for sure, you will need to glue a new element. To get a good result, work should be done in a clean room. Before sticking on a lint-free cloth, apply a cleaner and treat the surface with it. This is necessary to completely eliminate dust and degrease the surface.

Glass must be taken by the edges. Hands should be washed and dried. You can work with medical gloves. Then you need to pull the tab of the protective film, which is located on the adhesive surface, and remove it. The glass should be kept closer to the smartphone so that dust particles do not stick during operation.

The glass is placed away from the sensor and needs to be centered and aligned. Make sure all holes match. The product must be lowered onto the display, pressing it down a little. Bubbles should be removed immediately by wiping the surface with a dry cloth. At the end, you need to remove the film that served as protection for the product during transportation.

It is better to immediately eliminate dust particles that have fallen under the glass. It is necessary to carefully peel off the glass, removing debris. To do this, you can use a napkin or tweezers. Then the glass is put back in place. After that, the phone will again be protected from damage. The procedure for removing and sticking glass for all iPhones is the same. You just need to choose the right accessory.

The main function of the protective glass of a smartphone is to take a hit on itself, protecting the touchscreen from damage. When this happens, it often falls into disrepair, becoming covered with chips, cracks and other damage. The level of protection against this drops significantly, in addition, the view of the display worsens, and the smartphone loses its attractiveness. To change the coating to a new one, you must first remove the broken protective glass from the phone. And here there are difficulties, which will be discussed in the material.

Precautionary measures

It is necessary to take into account one important point before removing the old protective glass from the phone. Thanks to the perfectly smooth surface of the touch screen, the glass sticks to it very firmly. Usually it is held not by glue (although this happens), but by electrostatic forces. The two flat surfaces are very firmly in contact, making it impossible to remove the glass by simply prying it with a fingernail. If you take the first available tool (like a knife) - there is a risk of damaging the smartphone display and its case.

One silicone suction cup is also not enough. If you stick to a badly damaged glass, a vacuum does not form under it inside, and when force is applied, it will come off. If the grip is good, the suction cup will not come off, but another problem arises. The sensor is fixed in the housing using double-sided adhesive tape or glue, the tear strength of which is lower than that of the touchscreen and protective glass. Overdoing it, you can rip off the screen module completely, damaging its cables. Therefore, it is necessary to act deliberately and consistently.

How to remove the glass from the phone and stick a new one

Before you remove the broken protective glass from the phone and replace it, you need to prepare and arm yourself with a set of tools and tools.

This will require:

mediator, spatula or thin plastic card (preferably 2 pieces);
silicone suction cup optional;
lint-free napkin;
glass cleaner (preferably alcohol-containing), alcohol, vodka, or alcohol-based perfume (perfume, cologne) - to choose from;
medical gloves - optional.

Quite often new protective glass can be completed with necessary adaptations.

The dismantling procedure is extremely simple and takes a minute.

Before removing the protective glass from the phone, you need to wash your hands with soap and dry thoroughly, or just wear rubber gloves. This is to prevent fingerprints and streaks from appearing on the screen surface.
On broken glass, you should find the most complete corner, where there are no chips or other damage (or there is, but in the smallest amount). There you need to cling to the suction cup, pressing it to the screen.
The corner to which the suction cup is glued must be pryed off with a pick, spatula or suction cup so that the edge of the glass peels off. To do this, at the same time slightly pull the suction cup towards you. It is important not to overdo it so as not to rip off the screen before a gap forms between it and the glass! If there is no suction cup at hand, you can simply smoothly insert the mediator deeper into the resulting gap.
As the glass peels off, the mediator / spatula / card should be deepened. If the screen is large, it is recommended to work with two tools at once, moving them in different directions.
The final touch is to pull the suction cup towards you until the glass is completely torn off. You can take the edge with your fingers and do the same.

When replacing a protective glass on a smartphone, few people do not worry about compliance with the rules and perform regluing with improvised tools. As a result: scratches remain on the phone, the coating lies unevenly, becomes covered with bubbles, or simply does not hold tightly.

We have prepared a brief instruction-memo for those wishing to install the glass themselves. The article contains basic information, but for the sake of completeness, we recommend watching a video with a detailed description of the installation steps.

Removing old glass: what is important to remember

It must be understood that glass does not stick to the screen due to a special adhesive coating. The adhesion of the film to the smooth surface of the touchscreen is due to static. An attempt to remove it by prying it with a fingernail or (much worse) with a knife will end up damaging the screen and the phone case.

Even using a special suction cup can lead to unpleasant consequences. Remember, perform all actions smoothly. By pressing hard on the Velcro, you risk damaging the cables or tearing off the screen module. A vacuum is formed between the glass and the film, which will resist the adhesion of the coatings. But even if the suction cup adheres well to the film, there is a chance that the sensor will be damaged when the protective glass is removed. Therefore, act consistently and carefully.

What to prepare for installing protective glass:

mediator (or a thin plastic card) - it is better to take 2 pieces;
silicone suction cup (if you already have reinstallation experience, you can do without Velcro);
a napkin or a piece of cloth without lint;
glass cleaner containing alcohol (pure alcohol or perfume will also work);
medical gloves (silicone or rubber).
Armed with these tools, the job will take no more than two minutes.

Brief description of the process

Before starting work, make sure that there are no dust or lint on your hands. It is impossible to see the smallest particles on the fingers, so it’s better to play it safe and put on medical gloves. They are thin and fit tightly on the hand, so they will not interfere with work.

Next, install the suction cup on the area of the phone with damaged glass, where there are fewer fragments and cracks. Gently attach the Velcro to the corner of the screen, and then press down a little, stick to the glass. Take the pick and pull the suction cup towards you, only gradually increase the force, otherwise the glass will come off along with the screen.

As soon as you feel that the glass is peeling, deepen the pick.

When the glass around the perimeter peels off ~ 80%, feel free to pull the suction cup and tear off the old screen.

Putting on new glass

Before applying a new coat, remove dust and fingerprints. A lint-free cloth is suitable for this: first moisten the screen with glass cleaner and degrease the surface with a prepared cloth. Next, we move according to the scheme:

Carefully remove the adhesive protective surface on the film (keep the glass near the phone, otherwise air dust will stick while you transfer the film).

Place the glass as close to the screen as possible (align relative to the center, make sure that all holes for buttons, connectors and the camera pass through the film).

Slowly lower the screen protector onto the screen, pressing down and smoothing out from the center to the corners at the same time. Use a dry, lint-free cloth or thin plastic card to do this.

Remove the film applied for shipping protection.

It is not always possible to glue the glass on the phone without getting dust and lint. If you see that there are specks under the film, peel off the glass exactly to the place where there is dirt. You can also use a compressor, a technical vacuum cleaner or a can of compressed air to blow out dust particles. If nothing like this is at hand, use tweezers. Once the dirt is removed, glue the glass back.

When replacing a protective glass on a smartphone, few people do not worry about compliance with the rules and perform regluing with improvised tools.

As a result: scratches remain on the phone, the coating lies unevenly, becomes covered with bubbles, or simply does not hold tightly.

Instructions: how to install a protective glass on the phone

We have prepared a brief instruction-memo for those wishing to install the glass themselves.

The article contains basic information, but for the sake of completeness, we recommend watching a video with a detailed description of the installation steps.

Removing old glass: what is important to remember

What to prepare for installing protective glass:

mediator (or a thin plastic card) - it is better to take 2 pieces;

silicone suction cup (if you already have reinstallation experience, you can do without Velcro);

a napkin or a piece of cloth without lint;

glass cleaner containing alcohol (pure alcohol or perfume will also work);

medical gloves (silicone or rubber).

Armed with these tools, the job will take no more than two minutes.

Brief description of the process

Before starting work, make sure that there are no dust or lint on your hands. It is impossible to see the smallest particles on the fingers, so it’s better to play it safe and put on medical gloves. They are thin and fit tightly on the hand, so they will not interfere with work.

Next, install the suction cup on the area of the phone with damaged glass, where there are fewer fragments and cracks. Gently attach the Velcro to the corner of the screen, and then press down a little, stick to the glass. Take the pick and pull the suction cup towards you, only gradually increase the force, otherwise the glass will come off along with the screen.

As soon as you feel that the glass is peeling, deepen the pick.

When the glass around the perimeter peels off ~ 80%, feel free to pull the suction cup and tear off the old screen.

Putting on new glass

Before applying a new coat, remove dust and fingerprints. A lint-free cloth is suitable for this: first moisten the screen with glass cleaner and degrease the surface with a prepared cloth.

Take the protective glass by the edges (previously put on gloves).

Carefully remove the adhesive protective surface on the film (keep the glass near the phone, otherwise air dust will stick while you transfer the film).

Place the glass as close to the screen as possible (align relative to the center, make sure that all holes for buttons, connectors and the camera pass through the film).

Slowly lower the screen protector onto the screen, pressing down and smoothing out from the center to the corners at the same time. Use a dry, lint-free cloth or thin plastic card to do this.

Remove the film applied for shipping protection.

It is not always possible to glue the glass on the phone without getting dust and lint. If you see that there are specks under the film, peel off the glass exactly to the place where there is dirt.

You can also use a compressor, a technical vacuum cleaner or a can of compressed air to blow out dust particles.

If nothing like this is at hand, use tweezers.

Once the dirt is removed, glue the glass back.